We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with adjustable swivel arm, projector plate and hardware

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EIKI-LC-WB200 projector accessory

SKU CH-RS5R-7ZHYM

Ceiling mount positions compatible Eiki projectors four inches down with 360-degree swivel and ±35-degree tilt

  • TypeProjector Mounts
  • CNC-machined 6061-T6 aluminium plate ensures a precise, secure fit
  • 360-degree swivel with ±35° pitch and roll gives flexible positioning
  • Designed exclusively for Eiki LC-WB200, LC-WB200W, LC-XB250, LC-XB250W models
  • All mounting hardware and clear instructions included for quick installation
  • Low-profile design sets the projector about 4 inches from the ceiling

Dedicated Mount for Eiki Projectors

This ceiling mount is engineered exclusively for Eiki LC-WB200, LC-WB200W, LC-XB250 and LC-XB250W models. It replaces universal brackets with a CNC-machined 6061-T6 aluminium plate that matches the projector footprint precisely. The design leaves clearance for heat to escape while minimising coverage of the chassis. Installers who need a model-specific fit for these four projectors will find the correct hole pattern and hardware in one package.

Fixed 4-Inch Drop with 360° Orientation

The bracket positions the projector roughly 4 inches below the ceiling surface and allows full 360-degree swivel plus pitch and roll adjustment up to 35 degrees in any direction. This fixed offset suits rooms where a short, rigid drop is preferred and no extension column is required. The mount is rated for drywall or wooden beam ceilings only and is not intended for suspended or false-ceiling grids.

Included Hardware and Model-Specific Plate

Every bolt, screw and anchor needed for ceiling and projector attachment ships in the box alongside step-by-step instructions. The mounting plate you receive is machined for the listed Eiki models and may look different from product photos, but it will align with the projector’s mounting points. Buyers with other projector makes or models cannot use this kit, and no projector is included.

Highlights

  • CNC-machined 6061-T6 aluminium plate ensures a precise, secure fit
  • 360-degree swivel with ±35° pitch and roll gives flexible positioning
  • Designed exclusively for Eiki LC-WB200, LC-WB200W, LC-XB250, LC-XB250W models
  • All mounting hardware and clear instructions included for quick installation
  • Low-profile design sets the projector about 4 inches from the ceiling

Specifications

TypeProjector Mounts

Questions about this item

How do I install this ceiling mount on a drywall ceiling or wooden beam without drilling into the wrong spot?

Use the included hardware and follow the detailed instructions to secure the mount to a drywall ceiling or wooden beam, positioning the projector about 4 inches from the ceiling; do not use on drop or false ceilings.

What parts of this mount might need replacement after long-term use?

The CNC-machined 6061-T6 aluminum mounting plate and 360-degree swivel mechanism are built to last, so no routine replacement parts are expected under normal conditions.

At what tilt angle does the mount reach its mechanical limit?

The mount allows pitch and roll adjustment up to ±35 degrees from level; beyond that the swivel joint reaches its stop.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.