We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with 10 inch extension arm and adjustable mounting plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EIKI-EK-600U-MM-10EXT projector accessory

SKU CH-PN29-69BBZ

Ceiling mount positions compatible Eiki EK-600U and EK-601W projectors 10 inches down with 360-degree rotation and 80-degree tilt

  • TypeProjector Mounts
  • CNC-machined plate fits Eiki EK-600U and EK-601W precisely
  • 6061-T6 aircraft-grade aluminium construction resists bending
  • 360-degree rotation plus ±80° tilt for flexible aiming
  • Fixed 10-inch drop positions projector clear of ceiling
  • All hardware and instructions included for quick drywall or beam mounting

Compatible Projector Models

This ceiling mount is engineered specifically for the Eiki EK-600U and EK-601W projectors. It uses a CNC-machined mounting plate to ensure a precise fit for these models only. The projector plate you receive may differ from product images but will match the listed hardware. Buyers with any other projector model cannot use this mount.

Extension and Positioning

The mount sets the projector approximately 10 inches away from the ceiling surface. It provides 360-degree rotation plus pitch and roll adjustment with a maximum tilt of +/- 80 degrees. This range allows flexible image alignment in various room layouts. The fixed 10-inch drop cannot be shortened or extended further with this unit.

Build Quality and Installation

Construction uses 100 percent 6061-T6 aircraft-grade aluminum for durability. All necessary mounting hardware and detailed instructions are included for attachment to drywall ceilings or wooden beams. The design minimises projector coverage to preserve ventilation space for heat dissipation. This mount is not intended for drop or false ceiling installations.

Highlights

  • CNC-machined plate fits Eiki EK-600U and EK-601W precisely
  • 6061-T6 aircraft-grade aluminium construction resists bending
  • 360-degree rotation plus ±80° tilt for flexible aiming
  • Fixed 10-inch drop positions projector clear of ceiling
  • All hardware and instructions included for quick drywall or beam mounting

Specifications

TypeProjector Mounts

Questions about this item

Will this mount clear the projector's ventilation when installed 10 inches from the ceiling on an EK-600U?

Yes, the design leaves adequate space for heat to escape and the CNC-machined plate uses minimal coverage so vents on the Eiki EK-600U remain unobstructed.

How can I verify the mount is pitched and rolled correctly after installing it on an EK-601W?

The mount rotates 360 degrees and tilts ±80 degrees; once the projector image is square and centred on the screen, the alignment is correct.

Does the box contain the projector plate for the EK-600U and all ceiling hardware, or must I buy anything extra?

All necessary hardware for drywall or wooden-beam ceilings and the model-specific projector plate are included; the projector itself is not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.