We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with adjustable swivel arm, shown without projector

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EIKI-EIP-2500 Mount for EIP-2500 2600 3000N Projector Accessory

SKU CH-J70M-9QB7H

Ceiling mount positions Eiki EIP-2500, EIP-2600 or EIP-3000N projectors four inches down with 360-degree swivel and ±35-degree tilt from CNC-machined 6061-T6 aluminium

  • TypeProjector Mounts
  • Precise fit for Eiki EIP-2500 2600 3000N projectors
  • CNC-machined 6061-T6 aluminium plate ensures lasting strength
  • Full 360-degree rotation plus 35-degree tilt for flexible aiming
  • All hardware and clear instructions included for straightforward setup
  • Low-profile design holds projector about 4 inches from ceiling

Eiki EIP-2500, EIP-2600, EIP-3000N projector mount

This ceiling mount is built specifically for Eiki EIP-2500, EIP-2600 and EIP-3000N projectors. The CNC-machined 6061-T6 aluminium plate matches the mounting points of those models only. It is intended for installers who need a fixed, model-specific solution rather than a universal bracket. Projector not included.

360-degree swivel with 35-degree pitch and roll

The mount rotates a full 360 degrees and tilts plus or minus 35 degrees in any direction for precise image alignment. The design leaves open space around the projector so heat can escape naturally. The unit positions the projector roughly 4 inches from the ceiling surface. Not intended for drop or false ceilings.

Hardware kit and instructions included

All screws, anchors and fasteners needed for drywall or wooden-beam installation are supplied in the box. Step-by-step instructions guide the installer through a quick setup. The plate you receive may look different from product photos but will fit the listed Eiki models exactly.

Highlights

  • Precise fit for Eiki EIP-2500 2600 3000N projectors
  • CNC-machined 6061-T6 aluminium plate ensures lasting strength
  • Full 360-degree rotation plus 35-degree tilt for flexible aiming
  • All hardware and clear instructions included for straightforward setup
  • Low-profile design holds projector about 4 inches from ceiling

Specifications

TypeProjector Mounts

Questions about this item

How is the 360-degree swivel mount installed and what step is commonly missed?

Attach the CNC-machined 6061-T6 aluminum plate to the EIP-2500, EIP-2600 or EIP-3000N projector using the included hardware, then secure the arm to a drywall ceiling or wooden beam; the step often missed is verifying the plate orientation so the 4-inch drop and heat-escape clearance align correctly.

What maintenance or replacement will this ceiling mount need over time?

The aircraft-grade aluminum plate and steel hardware require no scheduled replacement; periodically check that the 360-degree swivel and +/-35-degree pitch/roll joints remain tight and that the 4-inch ceiling gap stays clear for ventilation.

What limit appears first when the mount is used continuously under a hot projector?

The fixed 4-inch standoff and +/-35-degree articulation range are the physical constraints; sustained heat from the EIP-2500, EIP-2600 or EIP-3000N makes the 360-degree swivel stiffness the first functional limit to monitor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.