We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping arm and projector plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. DELL-1550-LAT-13 projector accessory

SKU CH-TY63-SSY17

Ceiling mount for Dell 1550, 1650, 1850 and P318S projectors with 13 to 20 inch telescoping extension, 360-degree rotation and lateral shift adjustment

  • TypeProjector Mounts
  • Built to last with 100% 6061-T6 aircraft aluminium construction
  • Easy installation with all hardware and detailed instructions included
  • Telescoping extension positions projector 13 to 20 inches from ceiling in 1 inch steps
  • 360 degree rotation plus pitch and roll for flexible aiming
  • Lateral shift coupling gives 1-1/2 inches left/right adjustment for lens centring

Dell 1550/1650/1850/P318S projector mount

This ceiling mount is engineered specifically for Dell 1550, 1650, 1850 and P318S projectors. It provides a dedicated mounting platform that matches the exact hole pattern and weight balance of those models. Installers who need a precise fit without universal adapters will find this bracket purpose-built for that hardware.

Thermal clearance and 360-degree orientation

The CNC-machined plate uses minimal surface coverage so projector exhaust vents remain unobstructed. The arm rotates a full 360 degrees and allows pitch and roll adjustment in any direction. A lateral shift coupling adds 1-1/2 inches of side-to-side travel to centre the lens when the ceiling anchor is off-centre.

Aircraft-grade aluminium construction

The entire assembly is built from 6061-T6 aluminium for rigidity and corrosion resistance. Telescoping tubes lock in one-inch increments, positioning the projector roughly 13 to 20 inches below the ceiling. All mounting hardware and detailed instructions are included, though the kit is not rated for drop or false ceilings.

Highlights

  • Built to last with 100% 6061-T6 aircraft aluminium construction
  • Easy installation with all hardware and detailed instructions included
  • Telescoping extension positions projector 13 to 20 inches from ceiling in 1 inch steps
  • 360 degree rotation plus pitch and roll for flexible aiming
  • Lateral shift coupling gives 1-1/2 inches left/right adjustment for lens centring

Specifications

TypeProjector Mounts

Questions about this item

How do I install the mount and what step is often missed?

Attach the CNC-machined plate to the Dell 1550, 1650, 1850 or P318S, secure the telescoping column to the ceiling joist, then set the extension between 13 and 20 inches in 1 inch increments; the step often missed is adjusting the Lateral Shift Coupling up to 1-1/2 inches left or right to centre the lens before tightening.

What maintenance or replacement will this mount need later?

The 6061-T6 aircraft aluminium construction and included hardware are rated for the life of the projector; no scheduled maintenance or replacement parts are required.

What limit appears first under sustained use?

The mount rotates 360 degrees and holds the projector 13 to 20 inches from the ceiling; the structural limit is the ceiling joist capacity, not the aluminium arm or plate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.