We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. BENQ-MX604W-LAT-13 projector accessory

SKU CH-0YJS-AT1JX

Aircraft-grade aluminium ceiling mount positions compatible BenQ projectors 13 to 20 inches down with 360-degree rotation, pitch, roll and 1.5-inch lateral shift

  • TypeProjector Mounts
  • Aircraft-grade 6061-T6 aluminum construction ensures lasting durability
  • Telescoping extension adjusts from 13 to 20 inches in 1-inch steps
  • 360-degree rotation with full pitch and roll for precise aiming
  • 1-1/2 inch lateral shift centers the lens on off-center mounts
  • Model-specific CNC plate fits BenQ MH560 MS560 MW560 MX560 MX604W TH550 only

BenQ-compatible ceiling mount

This ceiling mount is designed specifically for BenQ MH560, MS560, MW560, MX560, MX604W and TH550 projectors. It uses a CNC-machined plate made from 6061-T6 aircraft-grade aluminium to ensure a precise fit and stable hanging. The design leaves adequate space around the projector for heat to escape during operation.

Telescoping extension and orientation

The telescoping arm sets the projector 13 to 20 inches from the ceiling in 1-inch increments. The mount rotates 360 degrees and allows pitch and roll adjustments in any direction. A lateral shift coupling provides 1-1/2 inches of left or right movement to centre the lens when the mounting surface is not aligned with the screen.

Included hardware and installation limits

All necessary mounting hardware and detailed instructions are supplied for quick installation. The mount is not intended for drop or false ceilings. The actual mounting plate received may differ from product images but will only fit the projector models listed above.

Highlights

  • Aircraft-grade 6061-T6 aluminum construction ensures lasting durability
  • Telescoping extension adjusts from 13 to 20 inches in 1-inch steps
  • 360-degree rotation with full pitch and roll for precise aiming
  • 1-1/2 inch lateral shift centers the lens on off-center mounts
  • Model-specific CNC plate fits BenQ MH560 MS560 MW560 MX560 MX604W TH550 only

Specifications

TypeProjector Mounts

Questions about this item

How do I set the 13 to 20 inch extension on the telescoping pole and what step do people miss?

Extend the pole to the desired inch increment, align the locking holes, then insert the security pin; the step often missed is fully seating the pin so the mount cannot slide under vibration.

What part of this mount will need checking or replacement after long-term use?

The 360-degree swivel joint and lateral shift coupling bolts can loosen over time; inspect and re-torque them annually to maintain alignment.

At what ceiling height does the 20 inch maximum extension become a limit for image placement?

With a fixed 20 inch maximum drop, rooms with ceilings higher than roughly 10 feet may prevent the lens from reaching the screen centre without an additional extension column.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.