We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with 10in extension arm for BenQ projectors

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. BENQ-MW612-MM-10EXT Projector Accessory 10in Extension

SKU CH-7EMP-MGS5Z

A 10-inch ceiling-mount extension positions compatible BenQ projectors 10 inches from the ceiling with 360-degree rotation and ±80-degree tilt

  • TypeProjector Mounts
  • Extends projector 10 inches from the ceiling
  • Rotates 360 degrees for flexible positioning
  • Tilts up to 80 degrees for angled projection
  • CNC-machined 6061-T6 aircraft aluminium ensures durability
  • Includes all hardware and instructions for quick installation

Compatible BenQ Projector Models

This ceiling mount is engineered specifically for the BenQ MW612, MX604, MX604w and MX611 projectors. The CNC-machined mounting plate ensures a precise fit using minimal projector coverage. It is not a universal mount and will not fit other models.

10-Inch Extension with Full Articulation

The arm positions the projector approximately 10 inches from the ceiling surface. The mount rotates 360 degrees and tilts up to 80 degrees in any direction for flexible image alignment. All necessary hardware and detailed instructions are included for installation on drywall or wooden beams.

Aircraft-Grade Aluminium Construction

The mounting plate and structure are built from 6061-T6 aircraft aluminium for durability. The design leaves adequate space around the projector for heat to escape during operation. This mount is not intended for drop or false ceiling installations.

Highlights

  • Extends projector 10 inches from the ceiling
  • Rotates 360 degrees for flexible positioning
  • Tilts up to 80 degrees for angled projection
  • CNC-machined 6061-T6 aircraft aluminium ensures durability
  • Includes all hardware and instructions for quick installation

Specifications

TypeProjector Mounts

Questions about this item

How do I attach the 10-inch extension to a drywall ceiling and what step is often missed?

Use the included hardware to fasten the ceiling plate to a wooden beam or drywall anchors, then bolt the projector-specific plate to the MW612, MX604, MX604w or MX611; the step people skip is verifying the beam location before drilling.

What part of this mount will need checking or replacement over time?

Inspect the 6061-T6 aluminum joints and the 360-degree rotation mechanism annually; tighten any bolts that have loosened from vibration and replace hardware if corrosion appears.

At what tilt angle does the mount reach its mechanical limit during daily adjustments?

The mount stops at +/- 80 degrees of tilt; pushing beyond that range stresses the CNC-machined plate and can damage the projector connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.