We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping pole extending 13 to 20 inches, CNC machined plate and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. BENQ-MH606W-LAT-13 Projector Ceiling Mount 13-20 inch extension

SKU CH-3C0P-CNZB2

Aircraft-aluminium ceiling mount fits listed BenQ models, telescopes 13-20 inches and rotates 360 degrees with lateral shift for lens centring

  • TypeProjector Mounts
  • Telescoping arm adjusts 13 to 20 inches from ceiling in 1 inch steps
  • CNC machined 6061-T6 aircraft aluminum plate ensures precise fit for listed BenQ models
  • 360 degree rotation with pitch and roll provides flexible image alignment
  • Lateral shift coupling centers lens when ceiling mount is off-center
  • All installation hardware and detailed instructions included for quick setup

BenQ projector ceiling mount

This ceiling mount is built for BenQ MH606W, MS550, MW550, MW605, MW605W, MX550 and MX604 projectors. It uses a model-specific mounting plate machined from 6061-T6 aircraft aluminium. The design leaves clearance for heat to escape while keeping projector coverage minimal. Buyers with other projector models will need a different mount.

Telescoping extension and lateral shift

The pole telescopes in one-inch steps to position the projector 13 to 20 inches from the ceiling. A lateral shift coupling provides one and a half inches of left or right adjustment to centre the lens when the mounting point is off-centre. The assembly rotates 360 degrees and allows pitch and roll in any direction. Not intended for drop or false ceilings.

Aircraft-grade aluminium construction

The mounting plate and hardware are CNC machined from 100 percent 6061-T6 aluminium for rigidity and corrosion resistance. All necessary fasteners and detailed instructions are included for a single-person installation. The fixed model-specific plate means no universal adapters are required, but it also prevents reuse with a different projector series.

Highlights

  • Telescoping arm adjusts 13 to 20 inches from ceiling in 1 inch steps
  • CNC machined 6061-T6 aircraft aluminum plate ensures precise fit for listed BenQ models
  • 360 degree rotation with pitch and roll provides flexible image alignment
  • Lateral shift coupling centers lens when ceiling mount is off-center
  • All installation hardware and detailed instructions included for quick setup

Specifications

TypeProjector Mounts

Questions about this item

How do I set the extension length between 13 and 20 inches during installation?

The telescoping pole adjusts in 1 inch increments; pull or push the inner tube until the desired hole aligns, insert the locking pin through both walls, then tighten the set screw — skipping the set screw is the step most people miss.

What hardware might need replacement after years of ceiling vibration?

The locking pin, set screw, and lateral-shift coupling bolts can loosen over time; keep spare M5 hardware on hand and re-torque them during routine projector filter cleaning.

At what point does the 1-1/2 inch lateral shift run out of travel when centering the lens?

The coupling provides exactly 1-1/2 inches of left or right movement; if the ceiling joist is offset more than that from the screen centre, the lens cannot be centred with this mount.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.