We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount plate with lateral shift coupling, extends projector five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. BENQ-LH770-SLOTTED projector accessory

SKU CH-CZ6V-GG8D2

Aircraft-aluminium ceiling mount positions compatible BenQ LH770 and LX770 projectors five inches from the ceiling with 360-degree rotation and 1.5-inch lateral shift

  • TypeProjector Mounts
  • Designed exclusively for BenQ LH770 and LX770 projectors
  • 100% aircraft-grade 6061-T6 aluminum construction
  • 360-degree rotation with full pitch and roll adjustment
  • 5-inch lateral shift centres the lens precisely
  • Sets the projector approximately 5 inches from the ceiling

Aircraft-aluminium mount for BenQ LH770 and LX770

This ceiling mount is machined from 6061-T6 aluminium and built specifically for the BenQ LH770 and LX770 projectors. The custom plate uses minimal coverage so heat can escape while the projector hangs securely. The unit rotates 360 degrees and tilts in any direction for precise image alignment.

Check model number and ceiling type before ordering

Verify that your projector is exactly a BenQ LH770 or LX770; the plate will not fit any other model. The mount positions the projector roughly 5 inches from the ceiling and is not designed for drop or false ceilings. You also need a solid structural fixing point because all hardware anchors directly to the ceiling joist.

Thermals, noise and power in normal use

The open plate design leaves ample space around the projector vents so the internal cooling runs as the manufacturer intended. The mount itself has no moving parts or fans, so it adds zero noise to the installation. It draws no power and simply holds the projector in a fixed position approximately 5 inches below the ceiling.

Highlights

  • Designed exclusively for BenQ LH770 and LX770 projectors
  • 100% aircraft-grade 6061-T6 aluminum construction
  • 360-degree rotation with full pitch and roll adjustment
  • 5-inch lateral shift centres the lens precisely
  • Sets the projector approximately 5 inches from the ceiling

Specifications

TypeProjector Mounts

Questions about this item

What hardware comes in the box and do I need to buy anything else?

All necessary mounting hardware is included with detailed installation instructions. The projector itself is not included and must be purchased separately.

Which BenQ models does this slotted mount fit?

This mount is designed specifically for the BenQ LH770 and LX770 projector models only and will not fit other models.

How far from the ceiling will the LH770 sit once mounted?

The mount positions the projector approximately 5 inches from the ceiling and allows 360-degree rotation plus 1-1/2 inches of lateral lens shift.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.