We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with slotted plate and lateral shift coupling, sets projector five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. BENQ-HT2550-SLOTTED projector accessory

SKU CH-BNPQ-1VZQP

Aircraft-aluminium ceiling mount positions compatible BenQ projectors five inches down with 360-degree rotation and lateral shift for precise lens alignment

  • TypeProjector Mounts
  • Precise fit for BenQ HT2550, W1700 and W1720 series projectors
  • 1-1/2 inch lateral shift centers the lens on off-center mounts
  • 6061-T6 aircraft aluminum construction resists flex and corrosion
  • 360-degree rotation with pitch and roll adjustment for flexible aiming
  • Fixed 5-inch drop positions the projector close to the ceiling

Precision Fit for BenQ Projectors

This ceiling mount is engineered exclusively for BenQ HT2550, HT2550M, W1700, W1700M, W1700S and W1720 models. It positions the projector roughly five inches from the ceiling using 6061-T6 aircraft-grade aluminium construction. The CNC-machined plate ensures accurate alignment while leaving ventilation paths clear. It is not designed for drop or false ceiling installations.

Simple Install with Lateral Adjustment

All required hardware and detailed instructions are included for a straightforward setup. The mount offers 360-degree rotation plus pitch and roll movement for flexible aiming. A Lateral Shift Coupling provides one and a half inches of side-to-side travel to centre the lens when the mounting point is off-axis. The plate supplied may look different from product images but will match the listed projectors only.

Fixed Drop Limits Placement Options

This model holds the projector at a set distance of approximately five inches from the ceiling surface. That fixed extension cannot be lengthened or shortened, so rooms needing a lower or higher position will require a different solution. The design suits standard flat ceilings only and is incompatible with suspended grid systems. Buyers needing variable drop lengths or drop-ceiling compatibility cannot use this mount.

Highlights

  • Precise fit for BenQ HT2550, W1700 and W1720 series projectors
  • 1-1/2 inch lateral shift centers the lens on off-center mounts
  • 6061-T6 aircraft aluminum construction resists flex and corrosion
  • 360-degree rotation with pitch and roll adjustment for flexible aiming
  • Fixed 5-inch drop positions the projector close to the ceiling

Specifications

TypeProjector Mounts

Questions about this item

How do I confirm the mount is holding the BenQ HT2550 level after I install it?

The mount rotates 360 degrees and pitches in any direction; tighten the locking knobs once the image is square and the projector sits approximately 5 inches from the ceiling.

What hardware comes in the box and do I need to buy anything else for a concrete ceiling?

All necessary mounting hardware and detailed instructions are included; you only need suitable anchors for your ceiling type, which are not supplied.

My projector is a W1700M — is this the correct version or is there a different SKU?

This single mount fits BenQ HT2550, HT2550M, W1700, W1700M, W1700S and W1720 models; no other version is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.