We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount plate with slotted arms and lateral shift coupling for BenQ projectors

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. BENQ-HT1070A-SLOTTED projector accessory

SKU CH-W5HP-HNJ39

Aircraft-aluminium ceiling mount with 360-degree rotation, lateral lens shift and a fixed 5-inch drop for BenQ HT1070A, W1050 and W1050S projectors

  • TypeProjector Mounts
  • Compatible with BenQ HT1070A, W1050 and W1050S models
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 100% aircraft-grade 6061-T6 aluminium construction for lasting rigidity
  • Lateral shift coupling gives 1-1/2 inches of left/right lens centring
  • Sets the projector approximately 5 inches from the ceiling

Compatible BenQ Projector Mount

This ceiling mount is designed exclusively for the BenQ HT1070A, W1050 and W1050S models. It uses a CNC-machined plate made from 6061-T6 aircraft aluminium to match the mounting points of those projectors. The plate you receive may look different from the photograph but will fit the listed units. Buyers with any other projector model cannot use this mount.

Easy Installation With Included Hardware

All required hardware and detailed instructions are supplied for a quick installation. The mount rotates 360 degrees and allows pitch and roll adjustment in any direction. A Lateral Shift Coupling provides 1-1/2 inches of left or right movement to centre the lens when the ceiling mounting point is off-centre. This product is not intended for drop or false ceilings.

Fixed Five Inch Extension Limit

The mount positions the projector approximately 5 inches from the ceiling surface. This fixed extension cannot be altered, so rooms requiring a longer or shorter drop need a different solution. The design leaves space around the projector for heat to escape while keeping the unit close to the ceiling.

Highlights

  • Compatible with BenQ HT1070A, W1050 and W1050S models
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 100% aircraft-grade 6061-T6 aluminium construction for lasting rigidity
  • Lateral shift coupling gives 1-1/2 inches of left/right lens centring
  • Sets the projector approximately 5 inches from the ceiling

Specifications

TypeProjector Mounts

Questions about this item

How can I confirm the mount is holding the BenQ HT1070A securely after I install it?

The mount is machined from 6061-T6 aircraft aluminium for the listed BenQ models only. After installation, verify the projector sits roughly 5 inches from the ceiling, the plate makes full contact with the chassis, and the unit rotates 360 degrees without binding.

What hardware comes in the box and do I need to buy anything else for a standard ceiling?

All necessary mounting hardware and detailed instructions are included. The package provides the CNC-machined projector plate, lateral shift coupling and ceiling bracket. You only need basic tools and suitable ceiling anchors for your ceiling type.

Which version should I choose if I own a BenQ W1050S versus a W1050?

This single slotted mount fits the HT1070A, W1050 and W1050S alike. No separate version or capacity options exist; the same plate accommodates all three model numbers listed in the title.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.