Projector Ceiling Mounts Direct, LLC.
Projector Ceiling Mounts Direct, LLC. ASUS-H1-SLOTTED projector accessory
Aircraft-aluminium ceiling mount positions an Asus H1 projector about five inches down with 360-degree rotation and lateral shift for precise lens alignment
- TypeProjector Mounts
- Precise fit for Asus H1 models
- 360-degree rotation with pitch and roll adjustment
- 100% 6061-T6 aircraft aluminum construction
- 5-inch lateral shift centres lens off-centre
- All hardware and instructions included for quick setup
ASUS H1 Ceiling Mount
This CNC-machined bracket is built specifically for Asus H1 projectors and attaches the unit to a solid ceiling. The 6061-T6 aircraft aluminium construction provides a rigid, vibration-resistant platform that leaves ventilation gaps for heat to escape. It is intended for permanent installations where the mounting surface aligns roughly with the screen centre.
Five-Inch Fixed Extension
The arm positions the projector approximately 5 inches from the ceiling, giving a low-profile drop that suits standard ceiling heights. Because the length is not adjustable, rooms that require a longer drop or installations on drop/false ceilings will need a different mounting solution. The fixed offset keeps the lens close to the ceiling plane for a clean appearance.
360° Rotation With 1.5-Inch Lateral Shift
A full 360-degree swivel combines with pitch and roll adjustment so the image can be squared to the screen from almost any ceiling anchor point. The Lateral Shift Coupling adds 1-1/2 inches of side-to-side travel to centre the lens when the joist or mount point is off-centre. All mounting hardware and detailed instructions are included; the projector itself is not.
Highlights
- Precise fit for Asus H1 models
- 360-degree rotation with pitch and roll adjustment
- 100% 6061-T6 aircraft aluminum construction
- 5-inch lateral shift centres lens off-centre
- All hardware and instructions included for quick setup
Specifications
| Type | Projector Mounts |
|---|
Questions about this item
Will the ASUS-H1-SLOTTED mount work with the existing ceiling joists in my older home?
The mount sets the projector approximately 5 inches from the ceiling and is not intended for drop or false ceilings, so it requires solid structural joists for secure attachment.
How can I verify the 360-degree rotation and lateral shift are functioning correctly after installation?
Rotate the projector fully through 360 degrees and slide the coupling 1-1/2 inches left and right; the lens should center on the screen smoothly at any position.
Does the box contain every bolt and bracket needed for the ASUS-H1-SLOTTED, or must I purchase additional hardware?
All necessary hardware and detailed instructions are included; the projector itself is not included and must be provided separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



