Projector Ceiling Mounts Direct, LLC. ACER-F211-MM projector accessory

Aluminium Ceiling Mount for Acer Projectors

This CNC-machined bracket is cut from 100% 6061-T6 aircraft aluminium and locks an Acer F211, F211S, F251, F261, P6200, P6200S, P6500 or P6600 unit roughly five inches below a solid ceiling. The plate fits only the models named above, so the projector vents stay clear and the centre of gravity stays centred. Every screw, anchor and washer needed for wood or drywall is in the box, together with step-by-step fitting instructions. The arm rotates 360 degrees and tilts plus or minus 80 degrees for precise image alignment.

Installers with Listed Acer Models Only

The mount suits technicians who need a permanent, low-profile ceiling fix for one of the eight Acer projectors named in the title. It will not work with any other brand or model, nor with drop-ceiling grids, so buyers carrying different hardware or suspended-ceiling tiles must choose another solution. Universal brackets that claim broad compatibility cover vents and add bulk this design avoids. If your projector is not on the list, this part cannot be adapted to fit.

Fixed Five-Inch Drop with 80-Degree Tilt

The bracket holds the projector at a set distance of about five inches from the ceiling surface and allows a maximum tilt angle of 80 degrees in any direction. This single measurement decides whether the image can be aimed at the screen from your ceiling height and mounting position. No extension column or height adjustment is provided, so the throw geometry must match the fixed offset before purchase.