Projector Ceiling Mounts Direct, LLC. ACER-BS-112E projector accessory

Acer BS-112E Ceiling Mount

This projector accessory is a model-specific ceiling mount built for Acer BS-112E, BS-312, BS-512, BS-520, D1P1719 and D1P1720 projectors. It uses a CNC-machined 6061-T6 aluminium plate that matches the projector's mounting points exactly. The unit positions the projector roughly four inches from the ceiling and provides 360-degree swivel with ±35-degree pitch and roll adjustment. It is not intended for drop or false ceilings.

Straightforward Drywall or Beam Installation

All required hardware and detailed instructions are supplied for mounting onto drywall or a wooden beam. The package contains every fastener needed for both the ceiling side and the projector side. Because the plate is made to fit only the listed models, there is no need to adjust universal brackets or drill new holes. Installers should verify the ceiling structure can support the load before drilling.

Fixed Four-Inch Drop With Full Orientation Range

The mount holds the projector at a set distance of about four inches from the ceiling surface, so rooms needing a shorter or longer drop will require a different solution. The 360-degree yaw and ±35-degree pitch and roll give ample aiming flexibility for typical ceiling heights. Buyers whose projector is not among the six listed models cannot use this plate, and the actual plate may look different from product photos while still fitting correctly.