We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount arm with projector plate, extends ten inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. 3M-DX70-MM-10EXT Projector Accessory

SKU CH-HX1Z-GXP2R

A ceiling mount positions a 3M DX70 or DX70i projector roughly 10 inches below the surface with 360-degree rotation and 80-degree tilt

  • TypeProjector Mounts
  • Designed exclusively for 3M DX70 and DX70i projectors
  • 360-degree rotation with ±80° tilt for flexible positioning
  • 10-inch extension places projector at optimal distance
  • CNC-machined 6061-T6 aircraft aluminium ensures rigid, lasting hold
  • All mounting hardware and clear instructions included for quick setup

Precision Fit for 3M DX70 and DX70i

This projector ceiling mount is engineered exclusively for the 3M DX70 and DX70i models. The CNC-machined mounting plate ensures exact fitment with minimal projector coverage. It is not a universal solution and will not fit other projector makes or models. Installation hardware and detailed instructions are included for drywall or wooden beam mounting.

Fixed 10-Inch Extension and Full Articulation

The mount positions the projector approximately 10 inches from the ceiling surface. It provides 360-degree rotation plus pitch and roll adjustment with a maximum tilt of +/- 80 degrees. This fixed drop length offers no further extension or retraction. The design is not intended for drop or false ceiling installations.

Aircraft-Grade Aluminum Build for Heat Management

The plate is machined from 6061-T6 aircraft aluminium, chosen for rigidity and durability. The minimal-coverage design leaves adequate space around the projector for heat to escape during operation. No moving parts or motors are present, so the mount adds no noise or power draw to the installation.

Highlights

  • Designed exclusively for 3M DX70 and DX70i projectors
  • 360-degree rotation with ±80° tilt for flexible positioning
  • 10-inch extension places projector at optimal distance
  • CNC-machined 6061-T6 aircraft aluminium ensures rigid, lasting hold
  • All mounting hardware and clear instructions included for quick setup

Specifications

TypeProjector Mounts

Questions about this item

Will this 10-inch extension mount clear my existing ceiling fan and lighting fixtures?

The mount positions the projector roughly 10 inches from the ceiling, so measure your fan blade height and light housing depth to confirm clearance before buying.

How can I verify the 360-degree rotation and 80-degree tilt are functioning correctly after installation?

After mounting, rotate the projector through a full 360-degree turn and tilt it to the 80-degree limit in each direction; smooth movement without binding confirms the mechanism works.

Does the box include every bolt and anchor needed for a drywall ceiling, or must I buy separate hardware?

All necessary hardware for drywall or wooden-beam installation is included in the box along with detailed instructions; no extra fasteners are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.