We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium telescoping ceiling mount with adjustable projector plate, extends 13 to 20 inches

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct INFOCUS-IN24-LAT-13 13-20in projector accessory

SKU CH-W80S-C6TPK

Ceiling mount for Infocus IN24, IN26, IN2102, IN2104 and IN2106 projectors, telescopes 13 to 20 inches with 360-degree rotation and lateral shift

  • TypeProjector Mounts
  • Adjustable 13 to 20 inch drop positions projector at ideal height
  • Telescoping extension locks in 1 inch increments for precise alignment
  • 100% 6061-T6 aircraft aluminum construction ensures rigid, lasting support
  • 360 degree rotation plus pitch and roll adjustment enables flexible aiming
  • Lateral shift coupling provides 1-1/2 inch side-to-side correction for off-centre mounts

Projector Ceiling Mount for Infocus Models

This ceiling mount is built specifically for Infocus IN24, IN26, IN2102, IN2104 and IN2106 projectors. It replaces universal brackets with a CNC-machined plate that matches the mounting points of those models only. The design leaves space around the chassis for heat to escape during operation. Buyers with any other projector make or model cannot use this mount.

Telescoping Extension and Lateral Shift Limits

The arm adjusts in 1 inch increments to position the projector 13 to 20 inches from the ceiling surface. A lateral shift coupling provides 1-1/2 inches of side-to-side travel to centre the lens when the mounting point is off-centre. The unit is not intended for drop or false ceilings, so a solid structural anchor is required. No other extension range or ceiling type is supported.

Aircraft Aluminium Construction and Movement

The mount uses 100 percent 6061-T6 aircraft aluminium for the plate and structural parts. It rotates 360 degrees and allows pitch and roll adjustment in any direction for precise image alignment. All necessary hardware and detailed instructions are included for a single-installer setup. The actual plate supplied may differ from product images but will fit the listed projectors only.

Highlights

  • Adjustable 13 to 20 inch drop positions projector at ideal height
  • Telescoping extension locks in 1 inch increments for precise alignment
  • 100% 6061-T6 aircraft aluminum construction ensures rigid, lasting support
  • 360 degree rotation plus pitch and roll adjustment enables flexible aiming
  • Lateral shift coupling provides 1-1/2 inch side-to-side correction for off-centre mounts

Specifications

TypeProjector Mounts

Questions about this item

Which projector models does the INFOCUS-IN24-LAT-13 mount fit?

This mount is designed for the Infocus IN24, IN26, IN2102, IN2104 and IN2106 models only. The CNC-machined plate matches those projectors precisely and will not fit other makes or models.

How far below the ceiling will the projector hang once installed?

The telescoping extension positions the projector approximately 13 to 20 inches from the ceiling, adjustable in 1-inch increments so you can set the exact drop you need.

What does the 360-degree rotation and lateral shift allow in practice?

The mount rotates a full 360 degrees and provides 1-1/2 inches of left-right lateral shift, letting you centre the lens even when the ceiling joist is off-centre from the screen.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.