We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with adjustable arm and slotted projector plate for Hitachi CP-TW3005 and TW3506

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct HITACHI-CP-TW3005-SLOTTED projector accessory

SKU CH-A9CF-JC8SB

A ceiling mount built from 6061-T6 aircraft aluminium positions Hitachi CP-TW3005 and TW3506 projectors five inches down with 360-degree rotation, pitch.

  • TypeProjector Mounts
  • Built to last with 100% 6061-T6 aircraft aluminum construction
  • Rotates 360 degrees with full pitch and roll adjustment for precise aiming
  • Lateral shift coupling provides 1-1/2 inches of side-to-side lens centering
  • CNC-machined plate fits Hitachi CP-TW3005 and TW3506 models exactly
  • Sets projector approximately 5 inches from ceiling for low-profile installation

Hitachi CP-TW3005 TW3506 dedicated mount

This ceiling mount is engineered exclusively for Hitachi CP-TW3005 and TW3506 projectors. It uses a CNC-machined plate that matches the chassis mounting points of those models only. The design leaves clearance for projector ventilation while keeping the unit close to the ceiling. Installers who need a model-specific fit rather than a universal bracket will find the plate alignment precise and repeatable.

360-degree rotation with lateral shift under load

The mount allows full 360-degree rotation plus pitch and roll adjustment so the image can be squared to the screen from any ceiling angle. A lateral shift coupling provides 1-1/2 inches of side-to-side travel to centre the lens when the mounting point is off-axis. Because the plate is machined from 6061-T6 aircraft-grade aluminium, the assembly resists flex during repeated adjustments and holds position once locked. The fixed extension places the projector roughly five inches from the ceiling surface.

Solid ceiling joist attachment only

This hardware kit is intended for direct mounting to structural ceiling joists or concrete anchors; it is not rated for drop or false ceiling grids. All required bolts, washers and spacers are included in the package along with illustrated instructions. The aluminium construction and fixed standoff distance mean the mount adds minimal leverage to the ceiling connection while keeping the projector securely oriented. Projector not included.

Highlights

  • Built to last with 100% 6061-T6 aircraft aluminum construction
  • Rotates 360 degrees with full pitch and roll adjustment for precise aiming
  • Lateral shift coupling provides 1-1/2 inches of side-to-side lens centering
  • CNC-machined plate fits Hitachi CP-TW3005 and TW3506 models exactly
  • Sets projector approximately 5 inches from ceiling for low-profile installation

Specifications

TypeProjector Mounts

Questions about this item

Does the mount block airflow and cause the Hitachi CP-TW3005 to overheat during all-day use?

The CNC-machined 6061-T6 aluminium plate leaves space for heat to escape, so the projector stays cool even when running continuously.

What tools or extra parts are needed before I can install the HITACHI-CP-TW3005-SLOTTED mount?

All necessary hardware and detailed instructions are included; you only need basic hand tools to secure the mount to a solid ceiling.

Will this slotted plate still fit if I keep my older Hitachi CP-TW3506 projector?

Yes, the mount is designed for both the CP-TW3005 and CP-TW3506 models, so it fits either unit without modification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.