We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping arm and lateral shift coupling for Epson 1450 projector

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct EPSON-PLHC1450-LAT-13 projector accessory

SKU CH-ZF2B-VAS3R

Ceiling mount for Epson PowerLite Home Cinema 1450 telescopes 13 to 20 inches, rotates 360 degrees, and shifts laterally 1-1/2 inches, machined from 6061-T6 aircraft aluminum

  • TypeProjector Mounts
  • 6061-T6 aircraft aluminium resists corrosion
  • 360 degree rotation plus pitch and roll for precise aiming
  • Telescoping extension sets projector 13 to 20 inches from ceiling
  • Lateral shift coupling centres lens when ceiling is off-centre
  • CNC machined plate fits Epson PowerLite Home Cinema 1450 only

Epson PowerLite Home Cinema 1450 Ceiling Mount

This aluminium ceiling mount is built specifically for the Epson PowerLite Home Cinema 1450 projector. It uses a CNC-machined plate made from 6061-T6 aircraft-grade aluminium to ensure a precise fit. The design leaves adequate space around the projector for heat to escape during operation. All necessary mounting hardware and detailed instructions are included for a straightforward installation.

Extension Range and Adjustment Limits

The telescoping extension positions the projector approximately 13 to 20 inches from the ceiling in one-inch increments. A Lateral Shift Coupling provides 1-1/2 inches of left or right adjustment to centre the lens with the screen. The mount rotates 360 degrees and can be pitched or rolled in any direction for image alignment. This mount is not intended for drop or false ceiling installations.

Projector Model Compatibility Check

Verify that your projector is the Epson PowerLite Home Cinema 1450 before ordering because the mounting plate fits only the models listed in the product title. The actual plate you receive may look different from product photographs but will match the specified projector. Ensure your mounting surface is a solid ceiling structure rather than a drop ceiling tile.

Highlights

  • 6061-T6 aircraft aluminium resists corrosion
  • 360 degree rotation plus pitch and roll for precise aiming
  • Telescoping extension sets projector 13 to 20 inches from ceiling
  • Lateral shift coupling centres lens when ceiling is off-centre
  • CNC machined plate fits Epson PowerLite Home Cinema 1450 only

Specifications

TypeProjector Mounts

Questions about this item

Should I pick the fixed or telescoping version for the 1450?

This model uses a telescoping extension that sets the projector 13 to 20 inches from the ceiling in 1 inch increments.

What does the 13 to 20 inch range mean once the mount is installed?

The projector lens will sit roughly 13 to 20 inches below the ceiling surface, adjustable in 1 inch steps for image alignment.

How does the lateral shift coupling work with the 360 degree rotation?

The coupling adds 1-1/2 inches of left or right lens centering while the arm rotates a full 360 degrees for any ceiling angle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.