We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount extension arm, 10 inch drop, CNC machined plate for Epson 7400 8400 9400 series

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct EPSON-EH-TW7400-MM-10EXT 10in Extension Projector Accessory

SKU CH-QRZW-3YX34

A 10-inch extension mount positions compatible Epson projectors away from the ceiling with 360-degree rotation and up to 80-degree tilt, machined from 6061-T6 aircraft aluminium for a precise fit

  • TypeProjector Mounts
  • Extends projector 10 inches from ceiling for optimal placement
  • 6061-T6 aircraft aluminium construction ensures durable, long-lasting performance
  • 360-degree rotation plus ±80° tilt allows precise image alignment
  • CNC-machined plate fits Epson TW7400, TW8400, TW8400W, TW9400, TW9400W exactly
  • All mounting hardware and clear instructions included for straightforward installation

10-inch Extension for Epson Projectors

This ceiling mount accessory positions compatible Epson projectors approximately 10 inches from the ceiling surface. It is designed exclusively for the EH-TW7400, TW8400, TW8400W, TW9400 and TW9400W models. The aircraft-grade 6061-T6 aluminium construction ensures a rigid, vibration-free platform for permanent home-cinema installations.

Replacing Universal Mounts and Short Drops

The fixed 10-inch extension replaces generic universal brackets that often obstruct projector vents or leave the lens too close to the ceiling for proper image geometry. The upgrade is worth it when the room layout demands a precise drop distance and the installer needs guaranteed fitment without adapter plates. It is not suited for drop-ceiling grids or installations requiring a shorter or longer fixed extension.

Drywall or Beam Installation with Included Hardware

All screws, anchors and a CNC-machined mounting plate arrive in the box alongside illustrated instructions for a single-person fit. The plate attaches to the projector first, then the assembly lifts onto the pre-secured ceiling bracket. The only common issue is attempting to mount on suspended ceiling tiles without additional structural support, which the mount is not rated for.

Highlights

  • Extends projector 10 inches from ceiling for optimal placement
  • 6061-T6 aircraft aluminium construction ensures durable, long-lasting performance
  • 360-degree rotation plus ±80° tilt allows precise image alignment
  • CNC-machined plate fits Epson TW7400, TW8400, TW8400W, TW9400, TW9400W exactly
  • All mounting hardware and clear instructions included for straightforward installation

Specifications

TypeProjector Mounts

Questions about this item

How far does the 10 inch extension place the Epson TW7400 from the ceiling surface?

The extension positions the projector roughly 10 inches below the ceiling, giving clearance for cables and airflow around the Epson TW7400 series.

What hardware and steps are required to secure the mount to a drywall ceiling or wooden beam?

All screws and anchors for drywall or wood are included; the critical step is pre-drilling pilot holes in the beam before driving the lag bolts so the 6061-T6 plate seats flush.

Will the CNC machined mounting plate need any adjustment or replacement after prolonged use?

The 6061-T6 aluminium plate is a fixed, precision fit for the listed Epson models and does not require periodic adjustment or replacement under normal conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.