We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium projector ceiling mount with lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct EPSON-BL-EB-720-SLOTTED projector accessory

SKU CH-6MBW-93152

Aircraft-grade aluminium ceiling mount with 360-degree rotation, lateral shift adjustment and 5-inch drop for select Epson BrightLink and PowerLite projectors

  • TypeProjector Mounts
  • CNC-machined 6061-T6 aluminium plate ensures precise fit for Epson EB-720, 725W, 725Wi, 735F
  • 360-degree rotation plus pitch and roll adjustment lets you aim the image exactly
  • 5-inch lateral shift coupling centres the lens when the mount is off-centre
  • Fixed 5-inch extension positions the projector close to the ceiling for a clean look
  • All mounting hardware and step-by-step instructions included for a quick installation

Ceiling Mount for Epson BrightLink Projectors

This ceiling mount is built specifically for Epson BrightLink PowerLite EB-720, 725W, 725Wi and 735F models. It uses 100 percent 6061-T6 aircraft aluminium for a rigid, lightweight structure. All mounting hardware and detailed instructions are included for a straightforward installation. The unit positions the projector roughly 5 inches from the ceiling.

Installers Needing Lateral Lens Alignment

The Lateral Shift Coupling provides 1-1/2 inches of left-right travel to centre the lens when the ceiling joist is off-axis. Full 360 degree rotation plus pitch and roll adjustment suit angled ceilings or corner placements. Buyers with drop or false ceilings should look elsewhere because this design is not rated for that structure. Anyone owning a projector outside the four listed models cannot use this plate.

Fixed 5-Inch Extension and CNC Plate

The CNC-machined plate matches the mounting holes on the EB-720, 725W, 725Wi and 735F without covering vents, preserving airflow. The set extension leaves a consistent 5-inch gap for cable routing and heat escape. Installations requiring a shorter drop, a longer column or a universal hole pattern will not be served by this fixed-length unit.

Highlights

  • CNC-machined 6061-T6 aluminium plate ensures precise fit for Epson EB-720, 725W, 725Wi, 735F
  • 360-degree rotation plus pitch and roll adjustment lets you aim the image exactly
  • 5-inch lateral shift coupling centres the lens when the mount is off-centre
  • Fixed 5-inch extension positions the projector close to the ceiling for a clean look
  • All mounting hardware and step-by-step instructions included for a quick installation

Specifications

TypeProjector Mounts

Questions about this item

What projector models must I already own for this EPSON-BL-EB-720-SLOTTED mount to fit?

The mount is designed only for Epson BrightLink PowerLite EB-720, 725W, 725Wi and 735F models; it will not fit any other projector.

How does the mount behave alongside the projector's existing lens-shift or keystone controls?

The mount provides 360-degree rotation plus pitch and roll adjustment, and its lateral-shift coupling adds 1-1/2 inches of left-right travel to centre the lens without fighting the projector's own settings.

How can I verify the mount is holding the projector correctly after installation?

The projector should sit roughly 5 inches from the ceiling, the CNC-machined 6061-T6 aluminium plate should be secure with all supplied hardware fitted, and the image should be centred using the lateral-shift coupling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.