We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescopic arm and adjustable mounting plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct Eiki EK-125UK EK-125WK EK-130U EK-131W/K EK-132X projector accessory

SKU CH-NN8M-HXN09

Ceiling mount positions compatible Eiki projectors 13 to 20 inches down with ±80° tilt, 360° rotation and 1½-inch lateral shift

  • TypeProjector Mounts
  • Adjustable 13 to 20 inch drop positions projector at ideal height
  • Tilts up to 80 degrees for flexible angled installations
  • 360 degree rotation enables any directional aiming
  • Lateral shift coupling centres lens when mount is off-centre
  • 100 percent 6061 aircraft aluminium construction ensures rigid support

Projector mount for Eiki EK-125UK and EK-130U

This ceiling mount is engineered specifically for Eiki EK-125UK, EK-125WK, EK-130U, EK-131W/K and EK-132X projectors. It replaces universal brackets with a CNC-machined plate that matches the unit's mounting points exactly. Installers get a secure, model-specific fit without adapter plates. The design leaves clearance for projector ventilation.

Extension range 13 to 20 inches with 80 degree tilt

The telescoping column positions the projector 13 to 20 inches from the ceiling in one-inch increments. Maximum tilt reaches 80 degrees in any direction and the column rotates 360 degrees for full aiming freedom. A lateral shift coupling provides one and a half inches of side-to-side adjustment to centre the lens when the ceiling joist is off-axis. The mount is not rated for drop or false ceilings.

Upgrade from universal mounts for fixed

This accessory replaces generic universal mounts that rely on adjustable clamps and often block exhaust vents. The aircraft-grade 6061-T6 aluminium construction eliminates flex under the projector's weight. The jump is worth it when the installation demands precise lens alignment, maximum heat clearance and a rigid, vibration-free platform on drywall or wooden beams.

Highlights

  • Adjustable 13 to 20 inch drop positions projector at ideal height
  • Tilts up to 80 degrees for flexible angled installations
  • 360 degree rotation enables any directional aiming
  • Lateral shift coupling centres lens when mount is off-centre
  • 100 percent 6061 aircraft aluminium construction ensures rigid support

Specifications

TypeProjector Mounts

Questions about this item

Will this mount clear the vents on my Eiki EK-130U so heat can escape?

The CNC-machined plate is designed specifically for the EK-130U and leaves adequate space around the projector for heat to escape.

How can I verify the mount is holding the projector level after I install it?

Check that the projector sits within the +/- 80 degree tilt range and use the 1-1/2 inch lateral shift coupling to centre the lens on the screen.

Does the box contain every bolt and bracket I need for a drywall ceiling?

All necessary hardware for drywall or wooden beam installation is included, plus detailed instructions for quick setup.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.