Projector Ceiling Mounts Direct, LLC.
Projector Ceiling Mounts Direct EIKI-EIP-WSS3100-MM projector accessory
Aircraft-aluminium ceiling mount positions an Eiki EIP-WSS3100 projector five inches down with 360-degree rotation and 80-degree tilt
- TypeProjector Mounts
- Precise fit for Eiki EIP-WSS3100 projectors
- 360-degree rotation plus 80-degree tilt range
- 100% aircraft-grade 6061-T6 aluminum construction
- All mounting hardware and instructions included
- Sets projector approximately 5 inches from ceiling
Eiki EIP-WSS3100 dedicated ceiling mount
This ceiling mount is built exclusively for the Eiki EIP-WSS3100 projector. It uses 100% 6061-T6 aircraft-grade aluminium for a rigid, lightweight structure. Installers receive every screw and bracket needed plus step-by-step instructions for a fast setup. The custom CNC-machined plate covers only the necessary footprint, leaving vents clear for heat dissipation.
360-degree rotation with +/- 80-degree tilt
The joint rotates a full 360 degrees and tilts up to 80 degrees in either direction, allowing precise image alignment from a single ceiling point. The fixed drop positions the lens roughly five inches below the ceiling surface, so the unit suits standard-height rooms but not drop-ceiling grids. No lateral shift or motorised adjustment is provided.
Model-specific fit only
The mounting plate matches the EIP-WSS3100 chassis exactly; any other projector — even similar Eiki models — will not attach securely. Buyers with different hardware must source a separate mount. Projector not included.
Highlights
- Precise fit for Eiki EIP-WSS3100 projectors
- 360-degree rotation plus 80-degree tilt range
- 100% aircraft-grade 6061-T6 aluminum construction
- All mounting hardware and instructions included
- Sets projector approximately 5 inches from ceiling
Specifications
| Type | Projector Mounts |
|---|
Questions about this item
Does the EIKI-EIP-WSS3100-MM mount offer different extension lengths or drop options to choose from?
This mount has a fixed design that sets the projector approximately 5 inches from the ceiling and does not offer selectable extension lengths.
What does the 360-degree rotation and +/- 80-degree tilt allow once the projector is installed?
You can rotate the projector a full 360 degrees and pitch or roll it up to 80 degrees in any direction for precise image alignment.
What mounting surfaces does the included hardware support for the EIKI-EIP-WSS3100-MM?
The supplied hardware is intended for installation onto drywall ceilings or wooden beams only.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible



