We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with 10 inch extension arm for Eiki projectors

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct EIKI-EIP-U4700-MM-10EXT projector accessory

SKU CH-YQ5Q-E3RS5

A ceiling mount positions compatible Eiki projectors 10 inches down with 360-degree rotation and ±80-degree tilt, machined from 6061-T6 aircraft aluminium for a precise fit

  • TypeProjector Mounts
  • Built to last with 100% aircraft-grade 6061-T6 aluminum
  • Installs quickly with all hardware and detailed instructions included
  • Sets projector 10 inches from ceiling for optimal positioning
  • Rotates 360 degrees with ±80° tilt for flexible aiming
  • Precision CNC plate fits EIP-U4700, EIP-W4600 and EIP-X5500 only

Eiki EIP-U4700 ceiling mount

This projector ceiling mount is built for Eiki EIP-U4700, EIP-W4600 and EIP-X5500 models only. CNC-machined from 6061-T6 aircraft aluminium, it provides a precise fit while leaving space for heat to escape. All required hardware and detailed instructions are included for a straightforward installation onto drywall or wooden beams.

360° rotation with ±80° tilt

The mount allows full 360-degree rotation and pitch adjustment up to 80 degrees in either direction. Its rigid aluminium construction keeps the projector stable without adding vibration or noise. Because it is a passive bracket, it draws no power and produces no heat of its own.

Fixed 10-inch extension from ceiling

This model positions the projector approximately 10 inches below the ceiling surface. It is designed for solid drywall or beam mounting and is not intended for drop or false ceilings. The custom plate covers minimal projector area, freeing ventilation ports and keeping cable routing accessible.

Highlights

  • Built to last with 100% aircraft-grade 6061-T6 aluminum
  • Installs quickly with all hardware and detailed instructions included
  • Sets projector 10 inches from ceiling for optimal positioning
  • Rotates 360 degrees with ±80° tilt for flexible aiming
  • Precision CNC plate fits EIP-U4700, EIP-W4600 and EIP-X5500 only

Specifications

TypeProjector Mounts

Questions about this item

How do I attach the CNC-machined 6061-T6 aluminum plate to my Eiki EIP-U4700 and what step is commonly missed?

Bolt the custom plate to the projector's four mounting points using the supplied hardware, then secure the arm to a joist — the step often missed is confirming the ceiling is solid drywall or wood, not a drop-ceiling tile.

What part of this mount will need checking or replacement after extended use?

The 360-degree rotation joint and +/-80-degree tilt mechanism should be inspected periodically for loosened bolts; the 6061-T6 aluminum plate itself does not wear, but the included steel hardware may need re-torquing.

At what ceiling-to-projector distance does this fixed-extension mount position the EIP-W4600?

The mount holds the projector approximately 10 inches from the ceiling surface; this distance cannot be adjusted, so verify the throw ratio works at that fixed offset before installing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.