Projector Ceiling Mounts Direct, LLC.
Projector Ceiling Mounts Direct DELL-S500-LAT-13 projector accessory 13-20 in extension Dell S500 S500wi S510
Ceiling mount for Dell S500, S500wi and S510 projectors telescopes 13 to 20 inches with 360-degree rotation and 1-1/2 inch lateral shift
- TypeProjector Mounts
- Telescoping extension adjusts 13 to 20 inches from ceiling
- 360-degree rotation plus pitch and roll for flexible aiming
- 5-inch lateral shift centres lens on off-centre mounts
- CNC-machined 6061-T6 aircraft aluminium plate fits Dell S500, S500wi, S510 only
- All mounting hardware and detailed instructions included for quick setup
Projector Mount for Dell S500 Series
This ceiling mount is built specifically for Dell S500, S500wi and S510 projectors. It uses a CNC-machined plate that matches those models only, so the projector hangs securely and heat can escape freely. The mount is made from 6061-T6 aircraft-grade aluminium for a rigid, long-lasting installation.
360-Degree Rotation and Lateral Shift
The mount rotates a full 360 degrees and offers pitch and roll adjustment in any direction. A lateral shift coupling provides 1-1/2 inches of side-to-side movement to centre the lens when the ceiling mounting point is off-centre. All required hardware and detailed instructions are included for a straightforward setup.
13-to-20-Inch Telescoping Extension
The telescoping column positions the projector 13 to 20 inches below the ceiling in one-inch increments. This fixed range suits rooms where the screen height matches that drop distance. It is not designed for drop or false ceilings, and the plate will not fit projectors outside the three Dell models listed.
Highlights
- Telescoping extension adjusts 13 to 20 inches from ceiling
- 360-degree rotation plus pitch and roll for flexible aiming
- 5-inch lateral shift centres lens on off-centre mounts
- CNC-machined 6061-T6 aircraft aluminium plate fits Dell S500, S500wi, S510 only
- All mounting hardware and detailed instructions included for quick setup
Specifications
| Type | Projector Mounts |
|---|
Questions about this item
Will the aluminium mounting plate need periodic tightening or replacement?
The 6061-T6 aircraft-grade aluminium plate is CNC machined for a precise fit and is built to last without scheduled maintenance.
How far from the ceiling can the projector be positioned before the extension limit is reached?
The telescoping tube adjusts in 1-inch steps and stops at 20 inches from the ceiling.
Does the mount restrict airflow around the projector during all-day operation?
The design leaves open space around the unit so heat can escape freely while the projector runs continuously.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



