We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with 10 inch extension rod

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct ACER-V270-MM-10EXT projector accessory 10 inch extension Acer V270 V550 V7850

SKU CH-S90P-TVKE4

Ceiling mount holds compatible Acer projectors 10 inches down with 360-degree rotation and 80-degree tilt using aircraft-grade 6061-T6 aluminum construction

  • TypeProjector Mounts
  • Sets projector 10 inches from ceiling for optimal placement
  • Rotates 360 degrees with ±80 degree tilt for flexible positioning
  • CNC-machined 6061-T6 aircraft aluminium ensures precise, durable fit
  • Custom plate designed exclusively for Acer V270, V550, V7850 models
  • All hardware and detailed instructions included for straightforward installation

Precision Fit for Acer Projectors

This ceiling mount is engineered specifically for the Acer V270, V550 and V7850 models. The CNC-machined mounting plate ensures exact alignment with the projector's mounting points. It leaves space around the chassis for heat to escape during operation. The projector itself is not included.

10-Inch Extension Replaces Flush Mounts

A fixed flush mount places the projector tight against the ceiling; this accessory adds a 10-inch drop to clear low-hanging obstacles or align the lens with the screen centre. The upgrade is worth it when the ceiling is too high for a flush fit or when a standard mount cannot reach the required projection angle. Not intended for drop or false ceilings.

6061-T6 Aluminium Handles 80-Degree Tilt

The aircraft-grade aluminium arm supports the projector at tilt angles up to 80 degrees in any direction and allows full 360-degree rotation. It comfortably handles the weight of the listed Acer models while maintaining rigid positioning. Headroom runs out if the projector exceeds the specified models or if the mounting surface cannot accept standard drywall or wooden-beam hardware.

Highlights

  • Sets projector 10 inches from ceiling for optimal placement
  • Rotates 360 degrees with ±80 degree tilt for flexible positioning
  • CNC-machined 6061-T6 aircraft aluminium ensures precise, durable fit
  • Custom plate designed exclusively for Acer V270, V550, V7850 models
  • All hardware and detailed instructions included for straightforward installation

Specifications

TypeProjector Mounts

Questions about this item

What ceiling clearance does the 10 inch extension create for the Acer V270 V550 V7850?

The extension positions the projector roughly 10 inches below the ceiling surface, giving that fixed drop for the listed Acer models.

Which hardware and steps are included for mounting the 6061-T6 plate to a drywall ceiling or wooden beam?

All screws, anchors and bolts needed for drywall or beam attachment are supplied, plus illustrated instructions; the step most often missed is pre-drilling pilot holes in the beam before driving the lag bolts.

When should the 360 degree swivel joint and tilt mechanism be checked or re-tightened after installation?

Inspect the swivel and tilt bolts after the first week of use and then every six months; vibration can loosen them, affecting the +/- 80 degree tilt range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.