We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping pole and lateral-shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct ACER-DX220P-LAT-13 projector accessory

SKU CH-49PQ-K942A

A telescoping projector ceiling mount offering 13 to 20 inches of extension with 360-degree rotation, lateral lens shift and aircraft-grade aluminium construction for select Acer models

  • TypeProjector Mounts
  • Precision CNC-machined plate fits listed Acer models exactly
  • 6061-T6 aircraft aluminium construction handles heat and resists wear
  • Telescoping column adjusts 13 to 20 inches in 1-inch steps
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 5-inch lateral shift centres lens when ceiling is off-centre

Projector Ceiling Mount for Acer Models

This aluminium ceiling mount is built for Acer DX220P, DX420P, ES550, EV-S80HP, W80HP, X80HP and EW550 projectors. It uses a model-specific plate machined from 6061-T6 aircraft-grade aluminium to ensure a precise fit. The design leaves space around the projector for heat to escape during operation. All required hardware and instructions are included for installation.

Thermals Noise and Power

The open mounting plate allows air to circulate freely around the projector so the unit can vent heat without obstruction. Because the accessory has no moving parts or electronics, it adds no noise and draws no power. The 6061-T6 aluminium construction resists corrosion and maintains structural integrity in typical indoor environments.

Sustained Load Behaviour

The telescoping extension locks the projector between 13 and 20 inches from the ceiling in one-inch increments, holding position securely over long periods. A lateral shift coupling provides 1-1/2 inches of side-to-side adjustment to centre the lens when the mounting surface is off-centre. The mount rotates 360 degrees and allows pitch and roll adjustments that stay fixed once tightened. It is not intended for drop or false ceilings.

Highlights

  • Precision CNC-machined plate fits listed Acer models exactly
  • 6061-T6 aircraft aluminium construction handles heat and resists wear
  • Telescoping column adjusts 13 to 20 inches in 1-inch steps
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 5-inch lateral shift centres lens when ceiling is off-centre

Specifications

TypeProjector Mounts

Questions about this item

How do I install the ACER-DX220P-LAT-13 mount and what step do people often miss?

Attach the CNC-machined 6061-T6 aluminium plate to the projector using the included hardware, secure the telescoping column to the ceiling joist — not drywall — then set the extension between 13 and 20 inches in 1-inch increments; the step installers skip is verifying the lateral shift coupling centres the lens before final tightening.

What maintenance or replacement will the ACER-DX220P-LAT-13 mount need later?

The 6061-T6 aluminium construction and included hardware are designed for the life of the installation; periodically check that the 360-degree rotation, pitch, roll and 1-1/2 inch lateral shift couplings remain snug, especially after vibration or building movement.

What limit appears first when the ACER-DX220P-LAT-13 mount is used continuously?

The telescoping extension range tops out at 20 inches from the ceiling, so rooms needing a lower projector position will hit that mechanical limit before any material fatigue occurs in the aircraft-grade aluminium.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.