We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Projectiondesign EVO 20SX+ projector lamp module with Philips UHP 220W bulb in housing

PROJECTIONDESIGN

PROJECTIONDESIGN EVO 20SX+ projector lamp 220W 2000 Hrs

SKU CH-F3MH-D2T8J

A ready-to-install replacement lamp module with a 220W UHP bulb rated for 2,000 hours of use

  • TypeUHP
  • Wattage220W
  • Lamp Life2,000 Hrs.
  • OEM Philips UHP bulb delivers reliable 220W brightness
  • 2,000-hour rated life reduces replacement frequency
  • Pre-assembled housing enables quick tool-free installation
  • ISO 9001 manufacturing ensures consistent beam performance
  • Compatible with Projectiondesign EVO 20SX+ model 120181

Ready-to-install lamp module

The Projectiondesign EVO 20SX+ lamp arrives as a complete bulb-and-housing assembly. It fits directly into compatible Projectiondesign projectors without extra assembly steps. Installers can swap the module and resume operation immediately.

220W UHP lamp thermals

The 220 watt UHP bulb generates the heat and light output specified for the original design. Cooling requirements match the projector's factory airflow and acoustic profile. Power draw stays at the rated 220 watts during normal operation.

2000-hour rated life

The lamp is rated for 2000 hours of use before replacement is recommended. Buyers who need longer intervals between changes should verify alternative lamp options. The 2000-hour figure is the single specification that determines the service schedule.

Highlights

  • OEM Philips UHP bulb delivers reliable 220W brightness
  • 2,000-hour rated life reduces replacement frequency
  • Pre-assembled housing enables quick tool-free installation
  • ISO 9001 manufacturing ensures consistent beam performance
  • Compatible with Projectiondesign EVO 20SX+ model 120181

Specifications

BrandProjectiondesign
TypeUHP
Wattage220W
Lamp Life2,000 Hrs.

Questions about this item

How do I install the EVO 20SX+ lamp module 003-120181-01 and which step is often missed?

The module arrives fully assembled with the Philips UHP 220W bulb inside the housing; power off the projector, let it cool, open the lamp door, swap the old module, close the door, then reset the lamp-hour counter in the menu — the counter reset is the step most people forget.

What maintenance or replacement will the EVO 20SX+ 220W lamp need after its rated life?

The UHP bulb is rated for 2000 hours; once that limit is reached you replace the entire lamp module again — no separate filter or bulb-only change is required for this design.

What limit appears first during sustained use of the 220W UHP lamp?

The 2000-hour rated lamp life is the first hard limit; brightness will gradually decline until the projector warns you to replace the module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.