Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00933729BTC
In stock
Progressive Hardware Co., Inc.
Progressive Hardware Co., Inc. AW45-2-1/4 Lever Spindle 5/16" Square x 2-1/4" Long door lock
Steel lever spindle measuring 5/16" square by 2-1/4" long replaces Arrow #12-386-2 1/4
- Selling UnitEach
- TypeSpindle
- Steel construction resists wear for long service life
- 5/16" square profile fits standard lever lock mechanisms
- 2-1/4" length matches common door thickness requirements
- 1/8" cross-hole secures lever handle with set screw
- Direct replacement for Arrow #12-386-2 1/4 and #17-386-2 1/4
Steel lever spindle replacement
This 5/16" square steel spindle measures 2-1/4" long and includes a 1/8" hole for set-screw retention. It is manufactured by Progressive Hardware as a direct replacement for Arrow #12-386-2 1/4 and Arrow #17-386-2 1/4 lever handles. The part is sold individually in new condition.
Fits lever handles needing this exact square
Installers repairing Arrow lever sets that specify a 5/16" square by 2-1/4" spindle will find the correct fit here. Builders whose hardware calls for a different square dimension, a longer or shorter spindle, or a threaded instead of drilled shaft should look at other parts.
5/16" square by 2-1/4" length is the deciding
Match both the square cross-section and the overall length to the original spindle before ordering. If the existing hardware requires any other square size or a different overall length, this spindle will not operate the latch correctly.
Highlights
- Steel construction resists wear for long service life
- 5/16" square profile fits standard lever lock mechanisms
- 2-1/4" length matches common door thickness requirements
- 1/8" cross-hole secures lever handle with set screw
- Direct replacement for Arrow #12-386-2 1/4 and #17-386-2 1/4
Specifications
| Brand | Progressive Hardware Co., Inc. |
|---|---|
| Model | AW45-2-1/4 |
| Selling Unit | Each |
| Type | Spindle |
Questions about this item
How do I install the 5/16" square spindle into the lever and what step is often missed?
Slide the spindle through the latch hub, align the 1/8" hole with the lever set-screw, then tighten the set-screw firmly; the step often missed is confirming the lever rotates freely after tightening.
What maintenance will this steel spindle need over time?
Apply a drop of light machine oil to the spindle ends once a year to prevent binding; no other maintenance is required unless the lever set-screw loosens.
What limit appears first when the spindle is used heavily on a high-traffic door?
The 1/8" cross-hole can elongate under repeated torque, causing the lever to wobble; at that point the spindle must be replaced.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
