We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass plated dummy rim cylinder, die cast, 1-3/4 inch diameter

Progressive Hardware Co., Inc.

Progressive Hardware Co., Inc. 195BP Brass Plated Dummy Rim Cylinder 1-3/4

SKU CH-5SY6-YG5E6 MPN 195BP

Brass-plated die-cast dummy rim cylinder covers old lock holes on doors up to 1-1/2 inches thick

  • FinishPolished Brass
  • TypeDummy Rim Cylinder
  • Fills rim-lock holes cleanly with 1-3/4" brass-plated dummy cylinder
  • Polished brass finish matches period hardware on restoration projects
  • Die-cast construction resists corrosion on interior and exterior doors
  • Installs in minutes using a single screwdriver and supplied fasteners
  • Suits doors up to 1-1/2" thick without modification

Dummy Rim Cylinder Purpose

This brass-plated die-cast cylinder fills the hole left after removing a rim lock. It provides a finished look on doors up to one and a half inches thick without any locking function. Installation only requires aligning the plates and tightening the screw with a screwdriver. The 195 model suits restoration or retrofit projects needing a clean appearance.

Fit and Limitations

Suitable for homeowners or contractors covering a rim-lock cutout on standard interior or exterior doors. The one and three-quarter inch diameter matches common rim-cylinder bores. Not for buyers who need an operating lock cylinder, a keyed entry function, or a different bore size. The dummy design cannot secure a door on its own.

Critical Dimension

The cylinder diameter is one and three-quarter inches, which must match the existing hole in the door. If the bore is larger or smaller, this cylinder will not cover it properly. Door thickness capacity is up to one and a half inches, so thicker doors need a different solution. Verify both measurements before purchase.

Highlights

  • Fills rim-lock holes cleanly with 1-3/4" brass-plated dummy cylinder
  • Polished brass finish matches period hardware on restoration projects
  • Die-cast construction resists corrosion on interior and exterior doors
  • Installs in minutes using a single screwdriver and supplied fasteners
  • Suits doors up to 1-1/2" thick without modification

Specifications

BrandProgressive
Model195BP
FinishPolished Brass
TypeDummy Rim Cylinder

Questions about this item

Will the 1-3/4" diameter cover the hole left by my old rim lock?

The 1-3/4" diameter face is designed to fill the opening where a rim cylinder was removed, covering standard cutouts cleanly.

How can I confirm the brass plated finish matches my existing hardware after installation?

The polished brass plating provides a consistent golden tone; compare it directly to your hinges or latch plates under the same lighting to verify the match.

Does the package include the mounting screws needed for a 1-1/2" thick door?

Yes, the cylinder comes with the screws required to fasten the plates through a door up to 1-1/2" thick; no extra hardware is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.