We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Profoto 2.8A charger for B1 500 AirTTL flash, compact unit with LED indicators

Profoto

Profoto 2.8A Battery Charger for B1 500 AirTTL Flash

SKU CH-3S2T-068JD

Charges the Profoto B1 500 AirTTL lithium-ion battery at 2.8 A for a full recharge in 2 hours, includes LED status indicators and a travel pouch for studio or location use

  • Maximise shooting time with a 2.8A output that fully recharges the B1 battery in 2 hours
  • LED indicators give real-time charging status so you always know the battery level
  • Multi-voltage design lets you charge the B1 500 AirTTL flash worldwide without a converter
  • Included cable and accessory pouch protect the charger during transport to studio or location
  • Designed exclusively for the B1 500 AirTTL lithium-ion battery to ensure reliable, optimised performance

Essential Power for Profoto B1 500 AirTTL

The Profoto 2.8A Battery Charger is built exclusively for the Profoto B1 500 AirTTL off-camera flash. It delivers a 2.8A output that replenishes the dedicated lithium-ion battery in just 2 hours, keeping the unit ready for continuous shooting sessions.

Ideal for mobile professionals.

Photographers who travel internationally benefit from the multi-voltage design and included accessory pouch for protected transport. Studios running several B1 units simultaneously will need additional chargers to maintain workflow without bottlenecking power availability.

2.8A output defines recharge speed

The single specification that determines suitability is the 2.8A charging current, which sets the fixed 2-hour recharge cycle for the B1 500 AirTTL battery. LED indicators provide real-time status updates so you can confirm readiness at a glance.

Highlights

  • Maximise shooting time with a 2.8A output that fully recharges the B1 battery in 2 hours
  • LED indicators give real-time charging status so you always know the battery level
  • Multi-voltage design lets you charge the B1 500 AirTTL flash worldwide without a converter
  • Included cable and accessory pouch protect the charger during transport to studio or location
  • Designed exclusively for the B1 500 AirTTL lithium-ion battery to ensure reliable, optimised performance

Specifications

No published specifications for this item yet.

Questions about this item

Will the B1 500 AirTTL battery eventually need replacing after many charge cycles?

The 2.8A charger is designed for the B1 500 AirTTL's Lithium-ion battery, which like all rechargeable cells will lose capacity over hundreds of cycles and require replacement when run time becomes too short.

What stops the charger from running continuously during a full-day shoot?

The unit completes a full recharge in 2 hours, so the practical limit is the battery's own capacity rather than the charger overheating or throttling.

How much heat or fan noise does the 2.8A charger produce when left on all day?

The multi-voltage charger uses LED indicators for status and has no fan mentioned, so it runs silently with minimal heat during its 2-hour charge cycle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.