We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow PLA filament spool in vacuum-sealed box

PrintOxe

PrintOxe Yellow PLA Filament 1.75 mm 1 kg ±0.03 mm

SKU CH-0XEH-BAPAP

Yellow PLA filament on a 1 kg spool with 1.75 mm diameter and ±0.03 mm accuracy, sealed with desiccant for moisture protection

  • ColorYellow
  • MaterialPLA
  • Diameter1.75 mm
  • Weight2.20 lbs. (1 kg)
  • Precise prints with ±.03 mm diameter accuracy
  • Reliable extrusion at 180 °C to 210 °C nozzle temperature
  • Ready-to-use filament vacuum-sealed with desiccant against moisture
  • Standard 1.75 mm diameter fits most popular 3D printers
  • Full 1 kg spool delivers 2.2 lbs of consistent PLA material

Yellow PLA filament for hobby printers

PrintOxe supplies a 1 kg spool of yellow PLA filament manufactured to a 1.75 mm diameter with a dimensional accuracy of ±0.03 mm. The material is vacuum-sealed with desiccant to protect it from humidity during storage. It targets hobbyists and makers who need a reliable, easy-to-print filament for everyday models.

Extrusion window and moisture protection

The recommended nozzle temperature range is 180 °C to 210 °C (356 °F to 410 °F), a window that works with most common desktop printers. Because PLA prints at lower temperatures than many other plastics, it typically produces less odour and warping during normal use. The sealed packaging helps maintain consistent extrusion by keeping the filament dry.

Upgrade from unbranded or aged spools

Switching to this filament makes sense when cheaper or poorly stored spools cause inconsistent diameter, clogging or layer adhesion problems. The tight ±0.03 mm tolerance reduces the risk of under- or over-extrusion on long prints. Buyers who need high-temperature resistance, flexible parts or engineering-grade mechanical properties should look at other material families.

Highlights

  • Precise prints with ±.03 mm diameter accuracy
  • Reliable extrusion at 180 °C to 210 °C nozzle temperature
  • Ready-to-use filament vacuum-sealed with desiccant against moisture
  • Standard 1.75 mm diameter fits most popular 3D printers
  • Full 1 kg spool delivers 2.2 lbs of consistent PLA material

Specifications

BrandPrintOxe
ColorYellow
MaterialPLA
Diameter1.75 mm
Weight2.20 lbs. (1 kg)

Questions about this item

How do I load the 1.75 mm filament and set the nozzle temperature, and what step do people often miss?

Heat the hot-end to 180–210 °C, then feed the 1.75 mm filament until it extrudes cleanly; the step many skip is pre-drying the spool if the vacuum seal was broken.

What ongoing care does the 1 kg PLA spool require after opening?

Store the spool in a sealed bag with fresh desiccant between prints; PLA absorbs moisture, which causes brittle filament and poor layer adhesion.

At what point does dimensional accuracy become the limiting factor during a long print?

The ±0.03 mm tolerance can cause under- or over-extrusion on very long runs, so recalibrate flow if layers start to look inconsistent.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.