We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent red PLA filament spool, 1.75 mm, 1 kg net weight

PrintOxe

PrintOxe Transparent Red PLA Filament 1.75 mm 1 kg

SKU CH-S8S2-ASWXF

Transparent red PLA filament on a 1 kg spool with 1.75 mm diameter and ±.03 mm accuracy for reliable 3D printing

  • MaterialPLA
  • Diameter1.75 mm
  • Weight2.20 lbs. (1 kg)
  • Transparent red colour shows internal detail clearly
  • 75 mm diameter fits most desktop 3D printers
  • Dimensional accuracy of +/- .03 mm keeps extrusion consistent
  • Vacuum-sealed with desiccant protects filament from moisture
  • 1 kg spool provides enough material for multiple prints

Transparent Red PLA 1.75 mm 1 kg Spool

PrintOxe supplies a 1 kg spool of transparent red PLA filament wound to a 1.75 mm diameter with a dimensional tolerance of ±0.03 mm. The material is vacuum-sealed with desiccant to resist moisture during storage. Recommended nozzle temperatures range from 180 °C to 210 °C for reliable extrusion.

Makers printing decorative or translucent parts

The clear red hue suits visual models, light-guides and artistic pieces where colour depth matters. Builders who need high-temperature resistance, mechanical load-bearing or opaque colours should choose a different material such as ABS, PETG or a filled composite.

±0.03 mm diameter accuracy

This tolerance keeps filament flow steady through standard 1.75 mm hot-ends and reduces the risk of under- or over-extrusion during long prints. If a printer requires stricter diameter control or a different filament size, this spool will not meet that requirement.

Highlights

  • Transparent red colour shows internal detail clearly
  • 75 mm diameter fits most desktop 3D printers
  • Dimensional accuracy of +/- .03 mm keeps extrusion consistent
  • Vacuum-sealed with desiccant protects filament from moisture
  • 1 kg spool provides enough material for multiple prints

Specifications

BrandPrintOxe
MaterialPLA
Diameter1.75 mm
Weight2.20 lbs. (1 kg)

Questions about this item

Will the 1.75 mm diameter spool fit on the 5.59 cm hub hole of my older printer?

The spool hub hole is 5.59 cm, matching many common printers; the 1.75 mm filament diameter is standard for most machines that accept 1.75 mm material.

How can I verify the filament is printing within the stated tolerance after setup?

Measure the extruded filament with calipers; it should stay within ±0.03 mm of 1.75 mm, and layers should bond cleanly at 180–210 °C nozzle temperature.

Does the vacuum-sealed box include a desiccant pack, or must I buy one separately?

The spool ships vacuum-sealed with a desiccant pack inside the box; no separate moisture-control purchase is needed for initial storage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.