We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver PLA filament spool 1.75 mm 1 kg vacuum sealed with desiccant

PrintOxe

PrintOxe Silver PLA Filament 1.75 mm 1 kg ±0.03 mm

SKU CH-AX5E-Q5FZ0

Silver PLA filament on a 1 kg spool with 1.75 mm diameter and ±0.03 mm accuracy for consistent 3D printing

  • ColorSilver
  • MaterialPLA
  • Diameter1.75 mm
  • Weight2.20 lbs. (1 kg)
  • Consistent layers from ±0.03 mm accuracy
  • Reliable printing at 180°C–210°C nozzle temperature
  • Ready-to-use filament sealed with desiccant
  • Fits common printers with 1.75 mm diameter
  • One kilogram net weight on standard spool

Silver PLA filament for hobby printers

PrintOxe silver PLA filament comes on a one-kilogram spool with a 1.75-millimetre diameter and a dimensional accuracy of plus or minus .03 millimetres. The material is vacuum-sealed with desiccant to resist moisture during storage. It suits hobbyists and makers who want a metallic-looking finish on standard FDM printers.

Printing temperature and handling

The recommended nozzle temperature range is 180 to 210 degrees Celsius, or 356 to 410 degrees Fahrenheit. PLA generally prints with low warping and minimal odour, so cooling fans can run at normal speeds without excessive noise. The sealed packaging helps maintain consistent extrusion by keeping the filament dry.

Upgrading from basic or aged filament

This spool replaces generic or poorly stored PLA that suffers from diameter variation or moisture absorption. The tight .03-millimetre tolerance reduces nozzle clogs and improves layer adhesion. Buyers who need higher temperature resistance or engineering-grade mechanical properties should look for other materials.

Highlights

  • Consistent layers from ±0.03 mm accuracy
  • Reliable printing at 180°C–210°C nozzle temperature
  • Ready-to-use filament sealed with desiccant
  • Fits common printers with 1.75 mm diameter
  • One kilogram net weight on standard spool

Specifications

BrandPrintOxe
ColorSilver
MaterialPLA
Diameter1.75 mm
Weight2.20 lbs. (1 kg)

Questions about this item

How do I mount the 19.50 cm diameter spool with its 5.59 cm hub hole, and what step do people miss?

Slide the spool onto the printer's holder so the 5.59 cm hub seats fully; the step often missed is breaking the vacuum seal before loading, otherwise the filament binds and won't feed.

What will need replacement after this 1 kg spool runs out?

Only the filament itself; the 1.75 mm PLA is consumed during printing, so you simply buy another 1 kg spool when the 2.20 lbs are used up.

At what nozzle temperature does the silver PLA start to degrade during long prints?

Stay within the 180 °C to 210 °C range; sustained extrusion above 210 °C causes heat creep and discolouration first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.