We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Light blue PLA filament spool, 1 kg, vacuum sealed with desiccant

PrintOxe

PrintOxe PLA Filament Sky Blue 1.75 mm 1 kg ±0.03 mm

SKU CH-C2HF-GK0V6

1.75 mm PLA filament on a 1 kg spool with ±0.03 mm dimensional accuracy for consistent extrusion

  • ColorSky Blue
  • MaterialPLA
  • Diameter1.75 mm
  • Weight2.20 lbs. (1 kg)
  • Precise prints with ±0.03 mm dimensional accuracy
  • Ready for popular printers at 180–210 °C nozzle temperature
  • Moisture-free storage thanks to vacuum-sealed spool with desiccant
  • Consistent 1.75 mm diameter for reliable extrusion
  • Standard 1 kg spool fits common hub sizes

PrintOxe PLA Filament Sky Blue 1.75 mm 1 kg

This 1.75 mm PLA filament comes in a sky blue colour on a 1 kg spool. It is manufactured to a dimensional accuracy of ±0.03 mm and vacuum-sealed with desiccant to protect against moisture. The material suits hobbyists, educators and makers producing prototypes, models or decorative prints.

Installation and common issues

The spool dimensions are 7.80 inches in diameter, 2.56 inches wide with a 2.20 inch hub hole, fitting most standard filament holders. Recommended nozzle temperature is 180°C to 210°C (356°F to 410°F). Poor bed adhesion or stringing usually indicates the temperature is outside this range or the filament has absorbed moisture despite the sealed packaging.

Check your setup before ordering

Verify that your printer accepts 1.75 mm filament and can reach the stated temperature window. Confirm the spool holder accommodates a 7.80 inch diameter and 2.20 inch hub hole. Ensure your slicer profile matches PLA settings and that the build surface is suitable for PLA adhesion without additional adhesives.

Highlights

  • Precise prints with ±0.03 mm dimensional accuracy
  • Ready for popular printers at 180–210 °C nozzle temperature
  • Moisture-free storage thanks to vacuum-sealed spool with desiccant
  • Consistent 1.75 mm diameter for reliable extrusion
  • Standard 1 kg spool fits common hub sizes

Specifications

BrandPrintOxe
ColorSky Blue
MaterialPLA
Diameter1.75 mm
Weight2.20 lbs. (1 kg)

Questions about this item

How can I verify the filament is feeding correctly after loading it?

Watch the first layer for consistent extrusion and measure the output diameter — it should stay within the ±0.03 mm tolerance.

What comes in the package and do I need anything else to start printing?

The box contains a vacuum-sealed 1 kg spool with desiccant; you only need a compatible 1.75 mm printer and a nozzle heated to 180–210 °C.

Which spool size should I choose for a standard 1.75 mm printer?

This 1 kg spool with a 19.50 cm outer diameter, 6.50 cm width and 5.59 cm hub hole fits most common 1.75 mm machines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.