We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red PLA filament spool, 1.75 mm diameter, vacuum-sealed with desiccant

PrintOxe

PrintOxe PLA Filament Red 1.75 mm 1 kg ±0.03 mm

SKU CH-K5XM-Y06BY

1.75 mm PLA filament on a 1 kg spool with ±0.03 mm accuracy and vacuum-sealed moisture protection

  • ColorRed
  • MaterialPLA
  • Weight2.20 lbs. (1 kg)
  • ±0.03 mm accuracy for consistent extrusion
  • 75 mm diameter fits most desktop printers
  • Vacuum-sealed with desiccant to prevent moisture uptake
  • 180 °C – 210 °C nozzle range for easy printing
  • 1 kg net weight on standard 19.5 cm spool

PrintOxe PLA 1.75 mm Red 1 kg

This filament is a 1 kg spool of red PLA with a 1.75 mm diameter and a dimensional accuracy of ±0.03 mm. It suits hobbyists and makers who need a reliable material for everyday 3D printing projects on common desktop machines. The spool is vacuum sealed with desiccant to protect the polymer from moisture during storage.

Upgrade from basic unbranded PLA

Switching to this grade reduces diameter variation that causes under-extrusion or nozzle clogs on long prints. The tighter tolerance is worth it when print failures waste time or when mechanical parts need consistent layer adhesion. Buyers who need high-temperature resistance or engineering-grade strength should choose a different polymer family.

Easy spool mounting and first-layer setup

The spool measures 7.80 inches in diameter, 2.56 inches wide, and has a 2.20 inch hub hole that fits most standard holders. Set the nozzle temperature between 180 °C and 210 °C (356 °F to 410 °F) for proper flow. If the filament absorbs ambient humidity after opening, it can bubble or string, so reseal it with desiccant between sessions.

Highlights

  • ±0.03 mm accuracy for consistent extrusion
  • 75 mm diameter fits most desktop printers
  • Vacuum-sealed with desiccant to prevent moisture uptake
  • 180 °C – 210 °C nozzle range for easy printing
  • 1 kg net weight on standard 19.5 cm spool

Specifications

BrandPrintOxe
ColorRed
MaterialPLA
Weight2.20 lbs. (1 kg)

Questions about this item

What spool hub size fits the 5.59 cm hub hole on this 1 kg PLA reel?

The spool has a 5.59 cm hub hole; ensure your printer's filament holder accepts that diameter and the 19.50 cm outer spool diameter.

How is the filament loaded and what step is often missed?

Open the vacuum-sealed box, remove the desiccant pack, mount the spool so it unwinds counter-clockwise, then feed the 1.75 mm filament into the extruder; the step often missed is keeping the loose end secured to the spool holes to prevent tangles.

When should this PLA spool be replaced or dried?

Replace the 1 kg spool when the remaining length is too short for your next print; if the filament absorbs moisture and prints with bubbles or poor layer adhesion, dry it at low heat before reuse.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.