We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange PLA filament spool in vacuum-sealed packaging with desiccant

PrintOxe

PrintOxe Orange PLA Filament 1.75 mm 1 kg

SKU CH-G14C-YFKQT

Orange PLA filament on a 1 kg spool with 1.75 mm diameter and ±0.03 mm accuracy, vacuum-sealed with desiccant

  • ColorOrange
  • MaterialPLA
  • Diameter1.75 mm
  • Weight2.20 lbs. (1 kg)
  • Precise prints with ±0.03 mm dimensional accuracy
  • 1 kg net weight gives long printing sessions
  • Vacuum-sealed with desiccant keeps filament dry
  • 180–210 °C nozzle range fits common printers
  • Standard 1.75 mm diameter works with many machines

PrintOxe Orange PLA 1 kg spool

This 1 kg spool of 1.75 mm PLA filament is made for hobbyists and makers who print regularly on common desktop machines. The vacuum-sealed packaging with desiccant keeps the material dry until it reaches the printer. PrintOxe grades the filament as 1st Grade for consistent feeding.

Dimensional accuracy ±0.03 mm and 180–210 °C range

The ±0.03 mm tolerance supports detailed models and functional parts without frequent nozzle clogging. At the recommended 180 °C to 210 °C nozzle temperature the material flows smoothly on most Bowden and direct-drive extruders. Very high-speed or high-temperature engineering prints may exceed the comfortable window of standard PLA.

Replaces smaller reels or moisture-damaged stock

Stepping up to a full kilogram reduces spool changes during long prints and lowers cost per gram compared with sample-sized coils. The sealed box solves the degradation that affects open spools left in humid workshops. Users who need high-temperature resistance or flexible materials will need a different polymer.

Highlights

  • Precise prints with ±0.03 mm dimensional accuracy
  • 1 kg net weight gives long printing sessions
  • Vacuum-sealed with desiccant keeps filament dry
  • 180–210 °C nozzle range fits common printers
  • Standard 1.75 mm diameter works with many machines

Specifications

BrandPrintOxe
ColorOrange
MaterialPLA
Diameter1.75 mm
Weight2.20 lbs. (1 kg)

Questions about this item

Will the 1.75 mm diameter work with my older printer that takes 1.75 mm filament?

Yes, the filament is 1.75 mm diameter with ± .03 mm accuracy, matching the spec used by most hobby printers.

How can I verify the filament prints correctly after loading it?

Print a temperature tower between 180 °C and 210 °C; consistent layer adhesion and clean overhangs show the filament is performing as specified.

Does the spool include a desiccant pack and what else might I need?

The vacuum-sealed box contains a 1 kg orange PLA spool with desiccant; you only need a printer that accepts 1.75 mm filament and a heated bed or adhesive if your build plate requires it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.