We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey PLA filament spool, 1 kg, 1.75 mm diameter, vacuum-sealed box

PrintOxe

PrintOxe Grey PLA Filament 1.75 mm 1 kg +/- .03 mm

SKU CH-AA16-TDMRR

Grey PLA filament on a 1 kg spool with ±.03 mm diameter accuracy for consistent 1.75 mm printing

  • ColorGray
  • MaterialPLA
  • Diameter1.75 mm
  • Weight2.20 lbs. (1 kg)
  • Consistent extrusion with ±.03 mm diameter accuracy
  • Ready to print after vacuum-sealed storage with desiccant
  • Fits standard 1.75 mm printers including MakerBot and Reprap
  • 1 kg net weight on a 19.50 cm spool for long runs
  • Extrudes cleanly at 180 °C to 210 °C nozzle temperatures

PrintOxe Grey PLA Filament 1.75 mm

This 1.75 mm diameter PLA filament suits hobbyists and makers who print prototypes, models or functional parts on desktop FDM printers. The net weight of 1 kg delivers enough material for multiple projects without frequent spool changes.

Vacuum-sealed spool with desiccant

The spool measures 7.80" in diameter and 2.56" wide with a 2.20" hub hole, fitting most common printer holders. Vacuum sealing with desiccant protects the filament from humidity, keeping it ready for reliable extrusion day to day.

Print temperature range 180°C to 210°C

The recommended nozzle temperature of 180°C to 210°C (356°F to 410°F) works with a wide range of popular printers. Dimensional accuracy of +/- .03 mm helps maintain consistent flow and layer adhesion across long prints.

Highlights

  • Consistent extrusion with ±.03 mm diameter accuracy
  • Ready to print after vacuum-sealed storage with desiccant
  • Fits standard 1.75 mm printers including MakerBot and Reprap
  • 1 kg net weight on a 19.50 cm spool for long runs
  • Extrudes cleanly at 180 °C to 210 °C nozzle temperatures

Specifications

BrandPrintOxe
ColorGray
MaterialPLA
Diameter1.75 mm
Weight2.20 lbs. (1 kg)

Questions about this item

What temperature range does the 1.75 mm PrintOxe PLA filament need at the nozzle?

The manufacturer recommends extruding between 180°C and 210°C, or 356°F to 410°F.

Will the spool fit a printer that takes a 5.59 cm hub hole?

Yes, the hub hole diameter is 5.59 cm (2.20 in) and the overall spool is 19.50 cm wide by 6.50 cm deep.

How do I load the vacuum-sealed spool without introducing moisture?

Open the bag only when ready to print, thread the free end through the extruder before releasing tension, and reseal any unused portion with desiccant.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.