We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vacuum-sealed spool of fluorescent yellow PLA filament on a plastic reel

PrintOxe

PrintOxe Fluorescent Yellow PLA Filament 1.75 mm 1 kg

SKU CH-32WD-K9RBV

Fluorescent yellow PLA filament in a 1 kg spool with 1.75 mm diameter and ±0.03 mm accuracy, vacuum-sealed with desiccant, prints at 180–210 °C

  • ColorFluorescent Yellow
  • MaterialPLA
  • Diameter1.75 mm
  • Weight2.20 lbs. (1 kg)
  • High-visibility prints with fluorescent yellow PLA
  • Consistent extrusion from ±0.03 mm diameter tolerance
  • Ready for common printers at 180–210 °C nozzle temperature
  • Moisture-protected spool vacuum-sealed with desiccant
  • Standard 1.75 mm spool fits 19.50 cm diameter hubs

PrintOxe Fluorescent Yellow PLA Filament

This 1.75 mm PLA filament comes in a fluorescent yellow colour and is supplied as a net 1 kg spool. It is suited to hobbyists and makers who want a bright, high-visibility material for general 3D printing projects. The spool is vacuum-sealed with desiccant to protect the filament from moisture before use. Compatible printers include many popular desktop models.

Dimensional accuracy and temperature window

The filament holds a diameter tolerance of ± .03 mm, which helps maintain consistent extrusion on most 1.75 mm systems. Printing temperature should be set between 180 °C and 210 °C (356 °F to 410 °F). Staying inside this range reduces the risk of under-extrusion or heat-related defects. PLA does not require a heated chamber, but bed adhesion can vary with surface type.

Spool mounting and first-layer issues

The spool measures 7.80 inches in diameter, 2.56 inches wide and has a 2.20 inch hub hole, so it fits most standard holders without adapters. Tangles can occur if the loose end is not secured when changing spools. First-layer problems usually stem from an unlevelled bed or incorrect nozzle height rather than the filament itself. Store the spool sealed when not printing to avoid moisture uptake.

Highlights

  • High-visibility prints with fluorescent yellow PLA
  • Consistent extrusion from ±0.03 mm diameter tolerance
  • Ready for common printers at 180–210 °C nozzle temperature
  • Moisture-protected spool vacuum-sealed with desiccant
  • Standard 1.75 mm spool fits 19.50 cm diameter hubs

Specifications

BrandPrintOxe
ColorFluorescent Yellow
MaterialPLA
Diameter1.75 mm
Weight2.20 lbs. (1 kg)

Questions about this item

Is the 1 kg spool the only size available for this fluorescent yellow PLA?

Yes, the listing shows a single net weight of 1 kg (2.2 lbs) on a 7.80" diameter spool with a 2.20" hub hole.

What does the ±0.03 mm dimensional accuracy mean for my prints?

It keeps the 1.75 mm filament diameter within tight limits, helping extruder grip stay consistent and reducing clogs or under-extrusion during long prints.

My printer uses a Bowden setup — will the 180–210 °C range work reliably?

The recommended nozzle window of 180 °C to 210 °C (356 °F to 410 °F) covers standard Bowden and direct-drive hot-ends for PLA.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.