We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze PLA filament spool in vacuum-sealed box

PrintOxe

PrintOxe Bronze PLA Filament 1.75 mm 1 kg

SKU CH-KT1R-SP6V2

Bronze PLA filament in 1.75 mm diameter with ±0.03 mm accuracy, vacuum-sealed 1 kg spool prints at 180–210 °C

  • ColorBronze
  • MaterialPLA
  • Diameter1.75 mm
  • Weight2.20 lbs. (1 kg)
  • Bronze metallic finish from real metal colour PLA
  • Consistent extrusion with ±0.03 mm dimensional accuracy
  • 75 mm diameter fits most desktop 3D printers
  • Prints reliably at 180 °C to 210 °C nozzle temperature
  • Vacuum-sealed spool with desiccant keeps filament dry

Bronze PLA filament for desktop 3D printing

This PrintOxe spool supplies one kilogram of 1.75 mm bronze-coloured PLA with a dimensional accuracy of +/- .03 mm. It is vacuum-sealed with desiccant to resist moisture during storage. The material suits hobbyists, educators and prototypers who want a metallic-looking finish without the weight or abrasion of true metal-filled filament.

Fits standard 1.75 mm direct-drive

The spool measures 7.80 inches in diameter, 2.56 inches wide and has a 2.20 inch hub hole, matching common printer mounts. Recommended nozzle temperature is 180 °C to 210 °C (356 °F to 410 °F), so no enclosure or hardened nozzle is required. Compatibility is listed for popular machines including MakerBot, RepRap, FlashForge, Printrbot and similar platforms.

Replaces standard PLA when a bronze aesthetic is

The jump is worth it for decorative models, jewellery prototypes or cosplay parts where a metal-like sheen reduces post-processing. It is not for functional parts that demand the strength, thermal resistance or electrical conductivity of real metal composites, nor for users who need larger spool sizes or diameters other than 1.75 mm.

Highlights

  • Bronze metallic finish from real metal colour PLA
  • Consistent extrusion with ±0.03 mm dimensional accuracy
  • 75 mm diameter fits most desktop 3D printers
  • Prints reliably at 180 °C to 210 °C nozzle temperature
  • Vacuum-sealed spool with desiccant keeps filament dry

Specifications

BrandPrintoxe
ColorBronze
MaterialPLA
Diameter1.75 mm
Weight2.20 lbs. (1 kg)

Questions about this item

How tight is the 1.75 mm diameter tolerance during a long print?

The filament is specified at +/- .03 mm dimensional accuracy, so the diameter stays within that band across the full 1 kg spool.

Does the bronze PLA need a hotter nozzle after hours of continuous extrusion?

The recommended nozzle range is 180°C to 210°C; staying inside that window keeps flow steady during extended runs.

Which spool dimensions must match my printer’s holder for this 1 kg roll to fit?

The spool measures 7.80" outer diameter, 2.56" width and a 2.20" hub hole — check those against your printer’s mount.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.