We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PETG tubes with twelve silver fittings and bending tools on a white background

PrimoChill

PrimoChill PETG 1/2in OD 30in 12 Fittings DIY Cooling

SKU CH-16YF-NCGRF

Complete PETG hard-tube kit with twelve G1/4 fittings, bending tools and cutter for custom loops

  • TypeCPU Block
  • Complete PETG loop kit with twelve G1/4 fittings included
  • Thicker 1/16in wall PETG tubing for safer operation
  • Universal tube cutter plus lube for clean cuts and bends
  • Rigid finishing bit smooths ends and fine-tunes tube length
  • Bending cord and 45/90 guide ensure precise angles

Complete PETG tubing kit for custom loops

This PrimoChill pack supplies six pieces of 30 inch PETG tubing with 1/2 inch outer diameter and 3/8 inch inner diameter, plus twelve RevolverSX fittings with G1/4 threads. The kit also includes a universal tube cutter, rigid bending cord, tube lube, finishing bit and a 45/90 degree bending tool so every step from measuring to final fitting is covered.

Thicker walls handle sustained pressure and heat

PETG tubing in this set uses a 1/16 inch wall thickness that resists deformation better than thinner acrylic alternatives during long gaming or rendering sessions. The material tolerates repeated thermal cycles without clouding or micro-fractures, keeping flow rates stable and leak risk low over months of continuous operation.

Replaces piecemeal acrylic or soft-tube purchases

Builders moving from individual acrylic sticks or flexible tubing gain a single validated bundle that eliminates thread mismatches and bend-radius guesswork. The jump is worth it when a loop needs more than a few bends, when colour-matched RevolverSX fittings are required, or when a first-time builder wants every tool and consumable in one box.

Highlights

  • Complete PETG loop kit with twelve G1/4 fittings included
  • Thicker 1/16in wall PETG tubing for safer operation
  • Universal tube cutter plus lube for clean cuts and bends
  • Rigid finishing bit smooths ends and fine-tunes tube length
  • Bending cord and 45/90 guide ensure precise angles

Specifications

TypeCPU Block

Questions about this item

How much heat does the 1/2in OD PETG tubing handle when the loop runs all day?

The PETG material provides superior strength to acrylic tubing with a thicker 1/16in wall for safer operation under continuous thermal loads.

Which thread standard do my existing blocks and radiators need for these 12 RevolverSX fittings?

All twelve fittings use G1/4 threads, matching the standard port found on most water blocks, radiators, pumps and reservoirs.

Will the 30in PETG lengths and included bending cord work with the 45 and 90 degree bends in my current loop layout?

The kit includes six 30in tubes, a 3ft solid bending cord, tube lube and a finishing bit so you can cut, bend and finish precise 45 or 90 degree turns.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.