We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
PrimoChill G1/4 90° rotary 15mm extension elbow fitting UV pink powder coated brass

PrimoChill

PrimoChill G1/4 90° Rotary 15mm Extension Elbow Fitting UV Pink

SKU CH-VZKR-TFBNK

A 90-degree rotary elbow with 15mm extension and 360-degree adjustment for custom liquid-cooling loops

  • TypeFittings
  • 360-degree rotary lets you aim the connection in any direction
  • 90-degree elbow redirects tubing runs away from components at unconventional angles
  • 15 mm extension provides added clearance when other components are in the way
  • 7 mm total height gives a compact profile for tight loop layouts
  • SX powder-coated UV pink finish adds colour-matched style to custom builds

15mm Rotary Elbow for Tight Loops

This PrimoChill G1/4 90° rotary extension elbow adds 15mm of clearance while letting you rotate the outlet a full 360°. The brass body carries a UV-reactive pink powder coat that glows under UV light. It threads directly into any G1/4 port to redirect tubing runs around crowded components. The 37.7mm total height keeps the profile low once installed.

Suits Custom Loops with Space Constraints

Builders who need to make a sharp 90° turn in a confined area will benefit from the rotary action and the short extension. It is not for loops that require a straight-through coupler or an angled fitting with a different bend radius. Systems using thread sizes other than G1/4 cannot use this fitting without additional adapters.

G1/4 Thread Compatibility

The fitting uses a standard G1/4 thread with a 5mm thread depth and installs to a 15mm base height. Verify that every component in your loop shares the same thread specification before purchasing.

Highlights

  • 360-degree rotary lets you aim the connection in any direction
  • 90-degree elbow redirects tubing runs away from components at unconventional angles
  • 15 mm extension provides added clearance when other components are in the way
  • 7 mm total height gives a compact profile for tight loop layouts
  • SX powder-coated UV pink finish adds colour-matched style to custom builds

Specifications

TypeFittings

Questions about this item

What thread size must my existing water-cooling components have to accept this G1/4 rotary elbow?

Your blocks, radiators or reservoirs need standard G1/4 threads; the fitting provides a male G1/4 end and a female G1/4 end for direct connection.

Will the 15 mm installed base height and 90° bend clear the motherboard VRM heatsink I am keeping?

The elbow adds 15 mm of height from the mounting surface and turns the run 90°; measure your VRM clearance against the 37.7 mm total height to confirm fit.

How can I verify the rotary joint moves freely after installation?

With the loop depressurised, gently rotate the elbow; smooth 360° movement without binding confirms the joint works.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.