We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six clear rigid PETG tubes, 12mm ID 16mm OD, 30in long

PrimoChill

PrimoChill 12mm ID 16mm OD Rigid PETG Tube 6 x 30in Clear DIY Cooling

SKU CH-N3F0-4WBV4

Clear rigid PETG tubing in 12 mm inner and 16 mm outer diameter, supplied as six 30-inch lengths for custom water-cooling loops

  • TypeCPU Block
  • Easy custom bends with 12 mm inner diameter tubing
  • Crystal-clear view of coolant through smooth PETG walls
  • Six 30-inch lengths cover multiple loop runs
  • Rigid construction resists kinks for lasting reliability
  • Beginner-friendly material cuts and bends without special tools

Rigid PETG Tubing for Custom Loops

PrimoChill 12mm ID 16mm OD rigid PETG tube is supplied in a pack of six 30in lengths for building custom watercooling circuits. The material cuts and bends with basic tools, making it accessible for first-time builders. Its smooth inner surface resists particulate buildup and helps keep coolant clear over time.

Suited for DIY Builders Needing Forgiving Material

This tubing suits enthusiasts who want to shape rigid runs without specialised heating equipment or complex fitting inventories. Builders who require tighter bend radii than PETG allows, or who plan to use alcohol-based or ethylene-glycol coolants, should consider alternative tubing types.

Fits 16mm OD Compression Fittings

Each 30in piece connects directly to 16mm OD rigid compression fittings, reducing the need for 90 degree rotaries or excessive adapters. The 2mm wall thickness provides structural rigidity for straight sections while still allowing measured bends. Six pieces give enough length for multiple runs with spare material for test fits.

Highlights

  • Easy custom bends with 12 mm inner diameter tubing
  • Crystal-clear view of coolant through smooth PETG walls
  • Six 30-inch lengths cover multiple loop runs
  • Rigid construction resists kinks for lasting reliability
  • Beginner-friendly material cuts and bends without special tools

Specifications

TypeCPU Block

Questions about this item

Do I need 16 mm OD rigid compression fittings to connect these 12 mm ID tubes?

Yes, the 16 mm outer diameter requires matching 16 mm OD rigid compression fittings for a secure seal.

Can I mix these 16 mm OD PETG tubes with older 12 mm OD acrylic runs in the same loop?

No, the 16 mm OD tubes need 16 mm fittings while 12 mm OD tubes need 12 mm fittings; they cannot share the same fitting size.

How can I confirm the 30 inch tubes are seated correctly after bending and cutting?

Check that each tube sits fully into the 16 mm compression fitting collar with no visible gap and that coolant flows without leaks at the joints.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.