We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six clear rigid PETG tubes 30in long 10mm ID 14mm OD

PrimoChill

PrimoChill 10mm ID 14mm OD Rigid PETG Tube 30in Clear 6pk

SKU CH-9DQG-2F977

Six 30-inch rigid PETG tubes with 10mm inner and 14mm outer diameter for custom watercooling loops

  • TypeCPU Block
  • Easy custom loops with simple cut and bend
  • 10mm ID fits 14mm OD compression fittings
  • Clear PETG shows coolant colour clearly
  • Smooth bore reduces particulate build-up inside
  • Six 30in lengths cover most build runs

Ready-to-bend PETG tubing for custom loops

PrimoChill 10 mm ID by 14 mm OD rigid PETG tubing is sold as six clear pieces, each 30 in long. The material cuts and heat-bends with basic tools, so builders new to hard-line water-cooling can shape clean runs without specialised mandrels or fittings. Virgin PETG construction resists clouding and particulate build-up for long-term clarity.

14 mm outer diameter sets fitting choice

Every tube in the pack shares a 14 mm OD with a 2 mm wall, so only 14 mm OD rigid-compression fittings will seal correctly. The 10 mm ID matches standard flow expectations, but the outer dimension is the single spec that decides whether existing or planned fittings are compatible.

Works with any 14 mm OD compression ecosystem

Tubes slide into matching compression bodies from any brand, freeing the builder from proprietary angled rotaries or excessive adapter counts. Cut-to-length flexibility lets a single 30 in piece serve multiple straight or bent segments, reducing waste and the number of separate fittings the loop requires.

Highlights

  • Easy custom loops with simple cut and bend
  • 10mm ID fits 14mm OD compression fittings
  • Clear PETG shows coolant colour clearly
  • Smooth bore reduces particulate build-up inside
  • Six 30in lengths cover most build runs

Specifications

TypeCPU Block

Questions about this item

How does the 10 mm inner diameter affect coolant flow in a custom loop?

The 10 mm bore keeps flow resistance low while still fitting standard 14 mm OD compression fittings, so pumps and blocks see unrestricted coolant movement.

Which fitting standard does the 14 mm outer diameter lock into?

It mates with any 14 mm OD rigid compression fitting, capping the tube securely without extra rotaries or 90-degree adapters.

What clearance is needed to route a 30-inch straight run or tight bend?

Each piece is 30 inches long with a 2 mm wall, so measure your chassis for straight sections or heat-bend radius before cutting.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.