PREXISO 3-in-1 Digital Angle Gauge Magnetic Laser Level Rechargeable 0-90° & 0-180° Range measurement tool
Measures angles from 0 to 360° with ±0.1° accuracy, projects three laser lines, and uses a magnetic base with auto-rotating display
- Includesbase
- 3-in-1 tool combines digital level, angle meter and laser line
- Two measurement modes with four unit options for versatile use
- High accuracy of ±0.1° at 0° and 90°
- Magnetic base with auto-rotating display for easy reading
- Rechargeable with wall-mount base for convenient storage
3-in-1 Digital Angle Gauge
This rechargeable tool combines a digital level, angle meter and cross-line laser in one unit. It is built for woodworkers, installers and DIY users who need to set angles, check level and project reference lines without switching instruments.
Sustained-use behaviour
The magnetic base holds the gauge firmly on ferrous surfaces while the auto-reversing backlit display stays readable in any orientation. An error warning appears if the tool tilts beyond 30 degrees, and a buzzer sounds when the reading approaches horizontal or vertical within one degree.
±0.1° accuracy at 0° and 90°
Resolution of 0.05° and the stated accuracy of ±0.1° at the cardinal angles determine whether this gauge meets the precision demands of fine joinery, saw setup or frame alignment.
Highlights
- 3-in-1 tool combines digital level, angle meter and laser line
- Two measurement modes with four unit options for versatile use
- High accuracy of ±0.1° at 0° and 90°
- Magnetic base with auto-rotating display for easy reading
- Rechargeable with wall-mount base for convenient storage
Specifications
| Includes | base |
|---|
Questions about this item
How much power does the rechargeable battery consume during all-day use?
The tool runs on an internal rechargeable battery; no external power supply is needed while it projects three Class II laser lines (< 1 mW) and measures angles from 0 to 360°.
What mounting surface or accessory is required before the magnetic base will hold?
A ferromagnetic surface such as a steel beam, saw table or the supplied wall-mount base lets the magnetic base lock on; non-magnetic materials need the base or a clamp.
Will the auto-rotating display stay readable when the gauge is clamped upside-down on an older saw fence?
Yes — the LCD backlight flips automatically when the tool is inverted, and the ERROR prompt appears only if the unit tilts more than 30° off plumb.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Lab Safety Supply Inc 667123 24 Well Tissue Culture Plate w/Lid PK50
- Assortments & Kits
Lab Safety Supply Inc 11L806 2mL Pipet Individually Wrapped PK600
- Assortments & Kits



