Premier Mounts
Premier Mounts PBC-UMS Universal Projector Mount 1.5" coupler
Universal projector mount holds models up to 25 lbs with ±20° tilt, 360° rotation and a 1.5" NTP coupler for vaulted or flat ceilings
- TypeProjector Mounts
- SpecificationsColor: Dark Gray Fits projectors under 25 lbs. +/-20° tilt a
- ColorBlack
- FeaturesOur PBL and PBC universal projector mounts fit most projecto
- Supports projectors up to 25 lbs with four double-jointed arms
- +/-20° tilt and roll for precise image alignment
- 360° rotation allows any projector orientation
- Mounts to flat, vaulted or cathedral ceilings
- Integrated 1.5" NTP coupler with internal cable routing
Universal Projector Mount 1.5" Coupler
The Premier Mounts PBC-UMS is a ceiling mount designed for projectors weighing up to 25 lbs. It suits installers who need a single mounting solution compatible with traditional, vaulted or cathedral ceilings. The integrated 1.5" NTP coupler allows direct attachment to standard threaded pipe without extra adapters. Buyers who need to suspend heavier projectors or require wall-mount options should look elsewhere.
Thermals Noise Power Draw
As a passive mechanical mount, the unit generates no heat, consumes no electricity and produces no audible noise during operation. Thermal management and power budgeting are therefore irrelevant to the installation. Cable routing is handled internally through the pipe to keep wiring tidy and out of the airflow path. There are no fan curves, power phases or efficiency ratings to consider.
Build Quality Connectors Mounting
Four patent-pending double-jointed arms provide flexible positioning to reach almost any projector mounting hole pattern. The arms allow +/-20° of tilt and roll adjustment plus full 360° rotation for precise image alignment. Dark grey steel construction resists corrosion in typical indoor environments. The 1.5" NTP thread mates directly with standard pipe, so no separate coupler or reducer is required for common ceiling drops.
Highlights
- Supports projectors up to 25 lbs with four double-jointed arms
- +/-20° tilt and roll for precise image alignment
- 360° rotation allows any projector orientation
- Mounts to flat, vaulted or cathedral ceilings
- Integrated 1.5" NTP coupler with internal cable routing
Specifications
| Brand | Premier Mounts |
|---|---|
| Model | PBC-UMS |
| Type | Projector Mounts |
| Specifications | Color: Dark Gray Fits projectors under 25 lbs. +/-20° tilt and roll 360° Rotation Mounts to traditional, vaulted or cathedral ceilings Mates with 1.5" NTP Cable routing inside pipe |
| Color | Black |
| Features | Our PBL and PBC universal projector mounts fit most projectors that weigh less than 25 lbs. They feature four double-jointed support arms that allow flexible positioning to reach almost any mounting point |
| Shipping weight | 4.54 kg |
| Package size | 381 × 191 × 127 mm |
Questions about this item
How do I attach the mount to a 1.5" NTP pipe and what step is often missed?
Thread the integrated coupler onto the 1.5" NTP pipe and tighten the set screw; the step often missed is routing the cables through the pipe before securing the mount.
What part will need adjustment or replacement after extended use?
The four double-jointed support arms may loosen over time and should be checked periodically; re-tighten the arm bolts to maintain the 25 lb rating.
At what tilt angle does the mount reach its mechanical limit?
The mount allows +/-20° of tilt and roll; exceeding this range stresses the double-jointed arms and can reduce holding strength.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


