Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081334BTC
In stock
Precision European Motorwerks
Precision European Motorwerks 25mm Hubcentric Wheel Spacers 5x100 5x112 57.1mm Silver 2pcs
25 mm hub-centric spacers with 57.1 mm bore fit 5×100 and 5×112 bolt patterns on listed Audi and Volkswagen models
- ColorSilver
- Hubcentric design centres the wheel for vibration-free driving
- 25 mm thickness widens track for improved stance and clearance
- Dual 5x100 and 5x112 bolt patterns fit many Audi and VW models
- 1 mm centre bore matches factory hub for precise fitment
- CNC-machined aluminium construction ensures strength and corrosion resistance
25mm Hubcentric Spacers 5x100 5x112
Precision European Motorwerks supplies two silver aluminium spacers, each 25mm thick, machined for a 57.1mm hub bore and dual 5x100 and 5x112 bolt patterns. They are built to fit listed Audi and Volkswagen models from 1990 through 2020. The hubcentric lip centres the wheel on the hub to reduce vibration.
Suits owners with correct bolt pattern and bore
These spacers suit owners whose wheels have a centre bore no smaller than 57.1mm and who can confirm 25mm of fender clearance. Buyers who cannot verify stud length for safe thread engagement or who lack extended lug bolts should look elsewhere. Vehicles outside the listed fitment years are not supported.
57.1mm hubcentric bore decides fit
The 57.1mm centre bore and matching lip diameter are the critical specification; the wheel bore must be at least this large to seat correctly. Both 5x100 and 5x112 bolt patterns must match the vehicle hub exactly. Extended lug bolts or studs are required but not included.
Highlights
- Hubcentric design centres the wheel for vibration-free driving
- 25 mm thickness widens track for improved stance and clearance
- Dual 5x100 and 5x112 bolt patterns fit many Audi and VW models
- 1 mm centre bore matches factory hub for precise fitment
- CNC-machined aluminium construction ensures strength and corrosion resistance
Specifications
| Brand | StanceMagic |
|---|---|
| Color | Silver |
Questions about this item
Do I need 57.1 mm centre-bore wheels to use these 25 mm spacers?
Yes, the spacer lip is 57.1 mm, so the wheel centre bore must be at least that diameter.
Will my factory 1.0 inch wheel bolts still engage enough thread with the 25 mm thickness?
The added 25 mm usually requires extended lug bolts or studs, which are not included, to keep safe thread engagement.
How can I confirm the 5x100 or 5x112 bolt pattern lines up correctly after fitting?
Each bolt hole should sit flush on the hub face and the wheel should centre on the 57.1 mm lip with no wobble.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
