PPA International
PPA International DisplayPort to VGA Adapter White 3 in. 1080p@60Hz
A compact white adapter that connects a DisplayPort source to a VGA display at up to 1080p@60Hz with plug-and-play simplicity
- TypeAdapter
- ColorWhite
- Length1" - 5"
- Cable Length3 in.
- Connector Number1
- Supports 1080p at 60 Hz for clear video
- Plug-and-play setup needs no driver install
- Compact 3-inch cable keeps desk tidy
- Connects DisplayPort source to VGA display
- White finish matches light-coloured setups
DisplayPort to VGA Adapter White 3 in
The PPA International adapter connects a DisplayPort source to a VGA display such as a projector or monitor. It supports video resolutions up to 1080p at 60 Hz. Audio transmission is not supported by this device. The unit is sold new in a white finish.
Plug-and-play installation with a fixed short cable
The adapter requires no drivers and works immediately after connection. A 3 inch cable length limits placement flexibility between the source and the VGA cable. The short tether can strain ports if the VGA cable is heavy or routed tightly. Ensure the DisplayPort socket is accessible and not recessed.
Video-only conversion capped at 1080p 60 Hz
The adapter converts a digital DisplayPort signal to analog VGA without audio support. Maximum output is 1080p at 60 Hz, so higher resolutions or refresh rates are not possible. It suits legacy displays and projectors but cannot drive modern high-refresh or high-resolution panels. The interface is one-way from DisplayPort source to VGA sink.
Highlights
- Supports 1080p at 60 Hz for clear video
- Plug-and-play setup needs no driver install
- Compact 3-inch cable keeps desk tidy
- Connects DisplayPort source to VGA display
- White finish matches light-coloured setups
Specifications
| Brand | PPA |
|---|---|
| Type | Adapter |
| Color | White |
| Length | 1" - 5" |
| Cable Length | 3 in. |
| Connector Number | 1 |
Questions about this item
How can I confirm the adapter is delivering 1080p at 60 Hz after connecting it?
Check the display settings on the source device and ensure the output is set to 1080p at 60 Hz; the monitor should report the same resolution and refresh rate.
The box shows a white 3 in. adapter — are any extra cables or converters required to reach a VGA monitor?
A standard VGA cable is needed to run from the adapter's VGA port to the monitor; the adapter itself only bridges DisplayPort to VGA.
I only need 1080p at 60 Hz — is this white 3 in. model the right choice or is there a higher-spec version?
This adapter is specified for up to 1080p at 60 Hz, matching your requirement exactly.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



