Powerwinch
Powerwinch RC30 Wireless Trailer Winch Marine Electronic
A wireless 12 V trailer winch pulls up to 11,500 lbs of boat weight with a 30 ft length limit, double-line pulley block, built-in light, corrosion-resistant frame and emergency crank
- Wireless 12V remote controls loading from a distance
- Pulls up to 11,500 lbs boat weight with pulley block
- Heat-treated gears and zinc-plated frame resist corrosion
- Built-in light enables night-time operation
- UV-resistant ABS housing protects internals from sun damage
Wireless Remote Trailer Winch
The Powerwinch RC30 is a 12-volt electric trailer winch operated by a wireless remote. It suits boat owners who want to load and launch a vessel up to 30 feet long without standing at the tongue. A corrosion-resistant zinc-plated frame and UV-resistant ABS housing protect the mechanism in marine conditions.
Sustained Pulling Behaviour
The winch uses a heat-treated gear system designed for smooth running during extended cycles. With the included pulley block, double-line pulls reach 7,500 lbs while the single-line rating covers boats up to 11,500 lbs. A level-wind system keeps cable spooling evenly under continuous load. The standard wiring harness is rated at 60 amps for steady current delivery.
Thermals Noise and Power
The sealed gear train and zinc-plated frame dissipate heat during normal operation without external cooling. The UV-resistant ABS housing contains operating sound at the trailer. Power comes from a 12-volt vehicle system through the 60-amp harness. An emergency crank provides manual override if electrical power is lost.
Highlights
- Wireless 12V remote controls loading from a distance
- Pulls up to 11,500 lbs boat weight with pulley block
- Heat-treated gears and zinc-plated frame resist corrosion
- Built-in light enables night-time operation
- UV-resistant ABS housing protects internals from sun damage
Specifications
| Brand | Powerwinch |
|---|
Questions about this item
How hot does the 12 V motor get during a full day of launching and retrieving?
The heat-treated gear system is designed for long-life wear and tear, and the zinc-plated frame helps dissipate heat during extended use.
What existing trailer wiring is required to power the 60 A harness?
A 12 V battery supply and a compatible 60 A wiring harness on the trailer are needed for the winch to operate.
Will the emergency crank still engage if I keep my older manual winch bracket?
The built-in emergency crank operates independently of any manual bracket, so it remains functional alongside older hardware.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



