We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
PowerWarehouse DT01581 DLP projector lamp module in plastic housing with bulb installed

PowerWarehouse

PowerWarehouse DT01581 DLP Replacement Lamp for Hitachi CP-WU9410, CP-WU9411, CP-WX9210

SKU CH-TDSF-FBMXN

DLP replacement lamp with cage and bulb fits Hitachi and ImagePro projectors including CP-WU9410 and CP-X9111

  • Ready for Hitachi CP-WU9410 and CP-WU9411 projectors
  • Compatible with CP-WX9210 and CP-WX9211 models
  • Works with CP-X9110 and CP-X9111 units
  • Fits ImagePro 9005, 9006W and 9007WU series
  • Includes cage and replacement bulb for simple install

Compatible Projector Models

This replacement lamp fits Hitachi CP-WU9410, CP-WU9411, CP-WX9210, CP-WX9211, CP-X9110 and CP-X9111 projectors. It also supports ImagePro 9005, 9006W, 9007WU and I-Pro series units. The lamp matches OEM part numbers DT01581 and 456-9005.

Replaces Original Lamp Module

The product includes both cage and bulb so you can swap the complete assembly in one step. It is worth ordering when the existing lamp reaches its rated hours or shows dimming and colour shift. A new module restores factory brightness without reusing the old housing.

Check Projector Model Before Ordering

Verify the exact model number on your projector matches the compatible list above. Confirm the OEM part number on the current lamp is DT01581 or 456-9005. This lamp is not for projectors outside the listed Hitachi and ImagePro series.

Highlights

  • Ready for Hitachi CP-WU9410 and CP-WU9411 projectors
  • Compatible with CP-WX9210 and CP-WX9211 models
  • Works with CP-X9110 and CP-X9111 units
  • Fits ImagePro 9005, 9006W and 9007WU series
  • Includes cage and replacement bulb for simple install

Specifications

BrandPowerWarehouse
ModelDT01581

Questions about this item

Does the DT01581 lamp module fit the CP-WU9410 projector housing?

The module is listed as compatible with the CP-WU9410, CP-WU9411, CP-WX9210, CP-WX9211, CP-X9110, CP-X9111, ImagePro 9005, 9006W, 9007WU and I-Pro 9005, 9006W, 9007WU models.

What is the correct way to seat the cage assembly during installation?

The lamp ships as a complete cage-and-bulb unit; insert the assembly until the retaining screws engage fully, then tighten them in a cross pattern to avoid misalignment.

When should the DT01581 bulb be replaced again?

Replace the bulb when brightness drops noticeably or the projector displays its lamp-hour warning; the included cage can be reused if it remains undamaged.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.