PowerEx NP-F970 2-Pack 7.4V 8800mAh Li-ion camera battery
Two 7.4 V 8800 mAh lithium-ion packs replace Sony NP-F970, NP-F960, NP-F950 and NP-F930 cells and show remaining capacity on the camera display
- Type26111701
- Pack2-Pack
- ChemicalLithium
- Capacity65.12 watt_hours
- Dimensions20'
- Featureslithium, 2, true
- 4V 8800mAh capacity powers long shoots
- Fully decoded design shows remaining charge on screen
- Dual-pack supply keeps a spare ready always
- Advanced protection circuits prevent overcharge and memory effect
- Wide Sony camcorder fit covers VX2100 to FS700U
Two-Pack 8800 mAh camera batteries
This two-pack supplies two 7.4 V 8800 mAh lithium-ion cells that replace Sony NP-F970, NP-F960, NP-F950 and NP-F930 packs. They suit videographers and photographers who need reliable primary or backup power for compatible Handycam and NXCAM camcorders. Each cell delivers 65.12 Wh of energy. The fully decoded design reports remaining capacity, shutter count and recharge performance on the camera’s own power-info screen.
Capacity and headroom for long shoots
At 8800 mAh each, the pair provides enough headroom for extended recording sessions, event coverage or all-day time-lapse work without swapping cells. The high-capacity chemistry maintains voltage under load so the camcorder stays powered through zoom and stabilisation demands. When the shoot exceeds a single battery’s runtime, the second pack is ready to hot-swap. Users who need more storage than two packs can offer will require additional cells.
Thermals noise and power draw
Lithium-ion chemistry generates minimal heat during normal discharge, so the camcorder body stays cool to the touch. No fan or moving parts means silent operation, ideal for quiet interview or wildlife recording. The built-in protection circuits guard against over-charge, over-discharge and short circuits, and the cells have no memory effect so they can be topped up at any time without capacity loss.
Highlights
- 4V 8800mAh capacity powers long shoots
- Fully decoded design shows remaining charge on screen
- Dual-pack supply keeps a spare ready always
- Advanced protection circuits prevent overcharge and memory effect
- Wide Sony camcorder fit covers VX2100 to FS700U
Specifications
| Brand | PowerEx |
|---|---|
| Type | 26111701 |
| Pack | 2-Pack |
| Chemical | Lithium |
| Capacity | 65.12 watt_hours |
| Dimensions | 20' |
| Features | lithium, 2, true |
Questions about this item
Will the 7.4V 8800mAh PowerEx batteries work in my older Sony DCR-VX2100 camcorder?
Yes, the PowerEx NP-F970 2-pack is fully decoded for the DCR-VX2100 and other listed Sony Handycam models, so the camera will recognise the capacity and report remaining runtime on its info screen.
How can I confirm the batteries are reporting capacity correctly on my FDR-AX1?
After inserting a battery, open the power source info screen on the FDR-AX1; the fully decoded design shows remaining capacity, shutter count and recharge performance directly there.
Does the 2-pack include a charger or do I need to buy one separately?
The package contains two PowerEx NP-F970 replacement batteries only; a compatible Sony or third-party NP-F series charger must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



