PowerBass
PowerBass 2XL-653 6.5" car speaker
6.5-inch coaxial speakers handle 150 W RMS per pair with a 14 oz magnet, 90 dB sensitivity and a 58 Hz – 20 kHz response
- Type6.5"
- Speaker Size6.5"
- Handles 150 W RMS per pair for clean output
- 90 dB sensitivity delivers loud sound with less power
- 58 Hz – 20 kHz range covers deep bass to crisp highs
- Silk dome tweeter adds smooth, detailed treble
- 5" mounting depth fits most factory locations
PowerBass 6.5" coaxial speakers
The PowerBass 2XL-653 is a pair of 6.5-inch full-range coaxial car speakers rated at 150 watts RMS per pair and 300 watts peak per pair. They feature a 1-inch Emperor's Silk dome tweeter, a non-woven wool paper cone with butyl rubber surround, a heavy motor structure with a 14 oz magnet, and a non-resonant basket with PBX custom mesh grille. Nominal impedance is 3-ohm and mounting depth is 2.5 inches.
Suits stereo upgrades needing 3-ohm coaxial fit
These speakers suit owners replacing factory 6.5-inch locations where a 3-ohm load matches the amplifier or head unit. They are not for systems requiring 4-ohm nominal impedance, installations with less than 2.5 inches of mounting depth, or buyers seeking component separates with external crossovers.
3-ohm nominal impedance decides fit
The 3-ohm nominal impedance is the critical specification that determines whether the speakers match the vehicle's amplifier or head unit output. Verify the source unit supports a 3-ohm load before purchase.
Highlights
- Handles 150 W RMS per pair for clean output
- 90 dB sensitivity delivers loud sound with less power
- 58 Hz – 20 kHz range covers deep bass to crisp highs
- Silk dome tweeter adds smooth, detailed treble
- 5" mounting depth fits most factory locations
Specifications
| Brand | PowerBass |
|---|---|
| Type | 6.5" |
| Speaker Size | 6.5" |
Questions about this item
How much heat does the 3-ohm voice coil generate during all-day listening?
The 3-ohm impedance draws more current than 4-ohm speakers, so the amplifier runs warmer; ensure your amp is stable at 3 ohms and has adequate ventilation.
What amplifier power is needed to drive the 75-watt RMS rating?
Use an amplifier rated for 75 watts RMS per channel at 3 ohms to match the speaker's continuous power handling without clipping.
Will the 2.5-inch mounting depth fit the factory door locations in my older vehicle?
The 2.5-inch mounting depth is shallow enough for most factory 6.5-inch door openings, but verify your specific door cavity depth before installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



